ST7FLITE39M6TR STMicroelectronics, ST7FLITE39M6TR Datasheet - Page 222

• Manufacturer Part Number: ST7FLITE39M6TR
• Description: IC MCU 8BIT 8K FLASH 20SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE39M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: LINSCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE3x
• Core: ST7
• Data Bus Width: 8 bit
• Development Tools By Supplier: ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• For Use With: 497-8403 - BOARD DEMO STCC08 AC SW DETECTOR497-6398 - BOARD EVAL ST7FLITE39/STM1403497-5858 - EVAL BOARD PLAYBACK ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Function Descriptions
Table 168. IO_Read
Note: When the IO port is in input configuration and associated alternate function is enabled
Table 169. IO_ByteWrite
Caution: When you write data in a port register in this function, the previous data in the port
222/235
Function Name
Function Prototype
Behaviour Description
Input Parameters
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
as an output, reading the port (DR) register will read the alternate function output status.
is modified.
IO_Read
Unsigned char IO_Read (IO_Port Read_Val)
Reads the port and returns the value.
Selects the port name.
IO_PORT_U
U = A,B,... The port name has to selected with reference
to the datasheet.
Unsigned char Port_Data
Returns the data in the port register.
None
None
None
None
IO_ByteWrite
Void IO_ByteWrite (IO_Port Port_Val4,unsigned char
IO_ByteData)
Writes data byte into port register.
Selects the port name.
IO_PORT_X
X= A,B,... The port name has to selected with reference to
the datasheet.
IO_ByteData
Data byte to be written into port register
None
If you want to write data in output mode, IO_Output must
have been called.
None
None
None