ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 139

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 89. TIMER8_OCMP_Mode
Note: When the Forced compare mode is selected, the input parameter 2 will not affect the
Function Name
Function Prototype
Behaviour Description
Input Parameter 1
Input Parameter 2
Input Parameter 3
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
output waveform and hence you can pass any value between 0x00 to 0xFC.
TIMER8_OCMP_Mode
Void TIMER8_OCMP_Mode(Timer8_Compare CMP, un-
signed char OCR_VALUE, Timer8_Olevel OUTPUT_L)
Configures the timer8 in Output compare or Forced com-
pare mode, depending upon the input parameter passed.
This function should be called twice in order to get both the
compare mode OCMP1 & OCMP2.
TIMER8_OCMP_X
X=1, output compare1 mode is selected.
X=2, output compare2 mode is selected.
TIMER8_FORCDCMP_Y
Y = 1, Forced compare1 is selected.
Y = 2, Forced compare2 is selected.
OCR_VALUE
You can select this value from 0x00 to 0xFC.
TIMER8_OUTPUT_F
A low level is reflected at the output compare pin after suc-
cessful comparison.
TIMER8_OUTPUT_R
A high level is reflected at the output compare pin after suc-
cessful comparison.
None
Timer correctly initialized.
None
Timer8 starts functioning in either of the above selected
modes, and the compare flag is set whenever the compare
occurs.
None
Function Descriptions
139/235