ST7FLITE29F2M6TR STMicroelectronics, ST7FLITE29F2M6TR Datasheet - Page 183

• Manufacturer Part Number: ST7FLITE29F2M6TR
• Description: IC MCU 8BIT 8K FLASH 20-SOIC
• Manufacturer: STMicroelectronics
• Series: ST7r

Specifications of ST7FLITE29F2M6TR

• Core Processor: ST7
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 15
• Program Memory Size: 8KB (8K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 2.4 V ~ 5.5 V
• Data Converters: A/D 7x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Processor Series: ST7FLITE2x
• Core: ST7
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: SPI
• Maximum Clock Frequency: 8 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 3
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Development Tools By Supplier: ST7FLIT2-COS/COM, ST7FLITE-SK/RAIS, ST7MDT10-DVP3, ST7MDT10-EMU3, STX-RLINK
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 7 Channel / 13 bit, 7 Channel
• For Use With: 497-5858 - EVAL BOARD PLAYBACK ST7FLITE497-5049 - KIT STARTER RAISONANCE ST7FLITE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Table 130. LART_LongICAPMode
Notes:
– This function is available only for the ST7FLite3 device.
– This function may affect other functions as it changes the clock source which will also affect
Function Name
Function Prototype
Behaviour Description
Input Parameter
Output Parameters
Required Preconditions
Functions called
Postconditions
See also
the LiteTimer Input capture functionality because this is used along with LART Input Capture
for this mode.
LART_LongICAPMode
Void LART_LongICAPMode( Lart_LongICAPInitParams
InitParams);
Enables the long input capture function of LART. This
function selects the clock source as LiteTimer output, In-
put capture source as LiteTimer input capture and inter-
rupt source as specified in InitParams.
InitParams:
LART_SELF_ICAP_IT_ENABLE
Enables LART Input Capture interrupt
LART_LT_ICAP_IT_ENABLE
Enables Lite Timer Input Capture interrupt
LART_ICAP_NO_IT_ENABLE
No Input Capture interrupt is enabled
None
None
None
Clock source for LART is selected as LiteTimer output and
LiteTimer Input capture is used as input capture source.
LART_LongICAPGetValue is used to read values when
input capture event occurs.
LART_LongICAPGetValue
Function Descriptions
183/235