MC9S12XEG128MAA Freescale Semiconductor, MC9S12XEG128MAA Datasheet - Page 292

• Manufacturer Part Number: MC9S12XEG128MAA
• Description: MCU 16BIT 128K FLASH 80-QFP
• Manufacturer: Freescale Semiconductor
• Series: HCS12r

Specifications of MC9S12XEG128MAA

• Core Processor: HCS12X
• Core Size: 16-Bit
• Speed: 50MHz
• Connectivity: CAN, EBI/EMI, I²C, IrDA, SCI, SPI
• Peripherals: LVD, POR, PWM, WDT
• Number Of I /o: 59
• Program Memory Size: 128KB (128K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 1.72 V ~ 5.5 V
• Data Converters: A/D 12x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 80-QFP
• Processor Series: S12XE
• Core: HCS12
• Data Bus Width: 16 bit
• Data Ram Size: 12 KB
• Interface Type: CAN/SCI/SPI
• Maximum Clock Frequency: 50 MHz
• Number Of Programmable I/os: 59
• Number Of Timers: 25
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWHCS12
• Development Tools By Supplier: KIT33812ECUEVME, EVB9S12XEP100, DEMO9S12XEP100
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8-ch x 12-bit
• No. Of I/o's: 59
• Eeprom Memory Size: 2KB
• Ram Memory Size: 12KB
• Cpu Speed: 50MHz
• No. Of Timers: 3
• No. Of Pwm Channels: 8
• Digital Ic Case Style: QFP
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Chapter 7 Background Debug Module (S12XBDMV2)
7.4.4
Firmware commands are used to access and manipulate CPU resources. The system must be in active
BDM to execute standard BDM firmware commands, see
Normal instruction execution is suspended while the CPU executes the firmware located in the standard
BDM firmware lookup table. The hardware command BACKGROUND is the usual way to activate BDM.
As the system enters active BDM, the standard BDM firmware lookup table and BDM registers become
visible in the on-chip memory map at 0x7FFF00–0x7FFFFF, and the CPU begins executing the standard
BDM firmware. The standard BDM firmware watches for serial commands and executes them as they are
received.
The firmware commands are shown in
292
WRITE_WORD
NOTE:
Because of an order from the United States International Trade Commission, BGA-packaged product lines and partnumbers
If enabled, ACK will occur when data is ready for transmission for all BDM READ commands and will occur after the write is
complete for all BDM WRITE commands.
indicated here currently are not available from Freescale for import or sale in the United States prior to September 2010
Command
Standard BDM Firmware Commands
Opcode
(hex)
C8
16-bit address
16-bit data in
Table 7-6. Hardware Commands (continued)
MC9S12XE-Family Reference Manual , Rev. 1.23
Data
Table
Write to memory with standard BDM firmware lookup table out of map.
Must be aligned access.
7-7.
Section 7.4.2, “Enabling and Activating
Description
Freescale Semiconductor
BDM”.