DF36034HJ Renesas Electronics America, DF36034HJ Datasheet - Page 212

• Manufacturer Part Number: DF36034HJ
• Description: MCU 3/5V 32K J-TEMP 64=QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300H Tinyr

Specifications of DF36034HJ

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 20MHz
• Connectivity: CAN, SCI, SSU
• Peripherals: PWM, WDT
• Number Of I /o: 45
• Program Memory Size: 32KB (32K x 8)
• Program Memory Type: FLASH
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Other names: HD64F36034HJ; HD64F36034HJ

Section 12 Timer Z
12.3.8
General Registers A, B, C, and D (GRA, GRB, GRC, and GRD)
GR are 16-bit registers. Timer Z has eight general registers (GR), four for each channel. The GR
registers are dual function 16-bit readable/writable registers, functioning as either output compare
or input capture registers. Functions can be switched by TIORA and TIORC.
The values in GR and TCNT are constantly compared with each other when the GR registers are
used as output compare registers. When the both values match, the IMFA to IMFD flags in TSR
are set to 1. Compare match outputs can be selected by TIORA and TIORC.
When the GR registers are used as input capture registers, the TCNT value is stored after detecting
external signals. At this point, IMFA to IMFD flags in the corresponding TSR are set to 1.
Detection edges for input capture signals can be selected by TIORA and TIORC.
When PWM mode, complementary PWM mode, or reset synchronous PWM mode is selected, the
values in TIORA and TIORC are ignored. Upon reset, the GR registers are set as output compare
registers (no output) and initialized to H'FFFF. The GR registers cannot be accessed in 8-bit units;
they must always be accessed as a 16-bit unit.
Rev. 4.00 Mar. 15, 2006 Page 178 of 556
REJ09B0026-0400