SAK-XC2364B-24F40L Infineon Technologies, SAK-XC2364B-24F40L Datasheet - Page 16

• Manufacturer Part Number: SAK-XC2364B-24F40L
• Description: IC MCU 16BIT FLASH 100-LQFP
• Manufacturer: Infineon Technologies
• Series: XC23xxBr

Specifications of SAK-XC2364B-24F40L

• Core Processor: C166SV2
• Core Size: 16/32-Bit
• Speed: 40MHz
• Connectivity: CAN, EBI/EMI, I²C, LIN, SPI, SSC, UART/USART, USI
• Peripherals: I²S, POR, PWM, WDT
• Number Of I /o: 76
• Program Memory Size: 192KB (192K x 8)
• Program Memory Type: FLASH
• Ram Size: 18K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 100-LSQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: SP000627180

Key to Pin Definitions
•
•
Table 6
Pin
3
4
5
Data Sheet
Ctrl.: The output signal for a port pin is selected by bit field PC in the associated
register Px_IOCRy. Output O0 is selected by setting the respective bit field PC to
1x00
Output signal OH is controlled by hardware.
Type: Indicates the pad type and its power supply domain (A, B, M, 1).
– St: Standard pad
– Sp: Special pad e.g. XTALx
– DP: Double pad - can be used as standard or high speed pad
– In: Input only pad
– PS: Power supply pad
Symbol
TESTM
P7.2
EMUX0
TDI_C
TRST
B
, output O1 is selected by 1x01
Pin Definitions and Functions
Ctrl.
I
O0 / I St/B
O1
IH
I
Type Function
In/B
St/B
St/B
In/B
Testmode Enable
Enables factory test modes, must be held HIGH for
normal operation (connect to
An internal pull-up device will hold this pin high
when nothing is driving it.
Bit 2 of Port 7, General Purpose Input/Output
External Analog MUX Control Output 0 (ADC1)
JTAG Test Data Input
If JTAG pos. C is selected during start-up, an
internal pull-up device will hold this pin high when
nothing is driving it.
Test-System Reset Input
For normal system operation, pin TRST should be
held low. A high level at this pin at the rising edge
of PORST activates the XC236xB’s debug system.
In this case, pin TRST must be driven low once to
reset the debug system.
An internal pull-down device will hold this pin low
when nothing is driving it.
XC2361B, XC2363B, XC2364B, XC2365B
B
, etc.
16
XC2000 Family / Value Line
General Device Information
V
DDPB
).
V1.2, 2010-04