ATMEGA649-16MI Atmel, ATMEGA649-16MI Datasheet - Page 234

• Manufacturer Part Number: ATMEGA649-16MI
• Description: IC AVR MCU FLASH 64K 5V 64QFN
• Manufacturer: Atmel
• Series: AVR® ATmegar

Specifications of ATMEGA649-16MI

• Core Processor: AVR
• Core Size: 8-Bit
• Speed: 16MHz
• Connectivity: SPI, UART/USART, USI
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 2K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-MLF®, 64-QFN
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

23.2.7
23.2.8
234
ATmega329/3290/649/6490
Display Blanking
Port Mask
When EXCLK in ASSR Register is written to one, and asynchronous clock is selected, the exter-
nal clock input buffer is enabled and an external clock can be input on Timer Oscillator 1
(TOSC1) pin instead of a 32kHz crystal. See
page 151
Before entering Power-down mode, Standby mode or ADC Noise Reduction mode with synchro-
nous LCD clock selected, the user have to disable the LCD. Refer to
page
When LCDBL is written to one, the LCD is blanked after completing the current frame. All seg-
ments and common pins are connected to GND, discharging the LCD. Display memory is
preserved. Display blanking should be used before disabling the LCD to avoid DC voltage
across segments, and a slowly fading image.
For LCD with less than 25/40 segment terminals, it is possible to mask some of the unused pins
and use them as ordinary port pins instead. Refer to
pins are automatically configured as port pins.
237.
for further details.
“Asynchronous Operation of Timer/Counter2” on
Table 23-3
for details. Unused common
“Disabling the LCD” on
2552K–AVR–04/11