STR911FM44X6 STMicroelectronics, STR911FM44X6 Datasheet - Page 24

• Manufacturer Part Number: STR911FM44X6
• Description: MCU 512K FLASH 96K SRAM USB CAN
• Manufacturer: STMicroelectronics
• Series: STR9r

Specifications of STR911FM44X6

• Core Processor: ARM9
• Core Size: 32-Bit
• Speed: 96MHz
• Connectivity: CAN, I²C, Microwire, SPI, SSP, UART/USART, USB
• Peripherals: Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
• Number Of I /o: 40
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 1.65 V ~ 2 V
• Data Converters: A/D 8x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-LQFP
• For Use With: MCBSTR9UME - BOARD EVAL MCBSTR9 + ULINK-MEMCBSTR9U - BOARD EVAL MCBSTR9 + ULINK2MCBSTR9 - BOARD EVAL STM STR9 SERIES
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Other names: 497-5061; 497-5061-2; 497-5061-2; STR911FM44X6T

Functional overview
2.17
2.18
24/73
the host computer must have a static image of the code being executed for decompressing the
ETM9 data. Because of this, self-modified code cannot be traced.
Ethernet MAC interface with DMA
STR91xF devices in 128-pin packages provide an IEEE-802.3-2002 compliant Media Access
Controller (MAC) for Ethernet LAN communications through an industry standard Medium
Independent Interface (MII). The STR91xF requires an external Ethernet physical interface
device (PHY) to connect to the physical LAN bus (twisted-pair, fiber, etc.). The PHY is
connected to the STR91xF MII port using as many as 18 signals (see pins which have signal
names MII_* in
The MAC corresponds to the OSI Data Link layer and the PHY corresponds to the OSI Physical
layer. The STR91xF MAC is responsible for:
●
●
The STR91xF MAC includes the following features:
●
●
●
●
●
●
●
●
A 32-bit burst DMA channel residing on the AHB is dedicated to the Ethernet MAC for high-
speed data transfers, side-stepping the CPU for minimal CPU impact during transfers. This
DMA channel includes the following features:
●
●
●
USB 2.0 slave device interface with DMA
The STR91xF provides a USB slave controller that implements both the OSI Physical and Data
Link layers for direct bus connection by an external USB host on pins USBDP and USBPN. The
USB interface detects token packets, handles data transmission and reception, and processes
handshake packets as required by the USB 2.0 standard.
The USB slave interface includes the following features:
Data encapsulation, including frame assembly before transmission, and frame parsing/
error detection during and after reception.
Media access control, including initiation of frame transmission and recover from
transmission failure.
Supports 10 and 100 Mbps rates
Tagged MAC frame support (VLAN support)
Half duplex (CSMA/CD) and full duplex operation
MAC control sublayer (control frames) support
32-bit CRC generation and removal
Several address filtering modes for physical and multicast address (multicast and group
addresses)
32-bit status code for each transmitted or received frame
Internal FIFOs to buffer transmit and receive frames. Transmit FIFO depth is 4 words (32
bits each), and the receive FIFO is 16 words deep.
Direct SRAM to MAC transfers of transmit frames with the related status, by descriptor
chain
Direct MAC to SRAM transfers of receive frames with the related status, by descriptor
chain
Open and Closed descriptor chain management
Table
3).
STR91xF