SAK-TC1796-256F150E BC Infineon Technologies, SAK-TC1796-256F150E BC Datasheet - Page 51

• Manufacturer Part Number: SAK-TC1796-256F150E BC
• Description: IC MCU 32BIT FLASH BGA-416
• Manufacturer: Infineon Technologies
• Series: TC17xxr

Specifications of SAK-TC1796-256F150E BC

• Core Processor: TriCore
• Core Size: 32-Bit
• Speed: 150MHz
• Connectivity: ASC, CAN, EBI/EMI, MLI, MSC, SSC
• Peripherals: DMA, POR, WDT
• Number Of I /o: 123
• Program Memory Size: 2MB (2M x 8)
• Program Memory Type: FLASH
• Ram Size: 256K x 8
• Voltage - Supply (vcc/vdd): 1.42 V ~ 1.58 V
• Data Converters: A/D 44x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 416-BGA
• Data Bus Width: 32 bit
• Data Ram Size: 256 KB
• Interface Type: 2xASC, 2xSSC, 2xMSC, 2xMLI
• Maximum Clock Frequency: 150 MHz
• Number Of Programmable I/os: 123
• Number Of Timers: 260
• Operating Supply Voltage: 3.3 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 8 bit, 10 bit, 12 bit, 44 Channel
• Packages: P-BGA-416
• Max Clock Frequency: 150.0 MHz
• Sram (incl. Cache): 256.0 KByte
• Can Nodes: 4
• A / D Input Lines (incl. Fadc): 44
• Program Memory: 2.0 MB
• For Use With: B158-H8537-G2-X-7600IN - KIT STARTER TC179X FAMILY
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: No
• Other names: SAKTC1796256F150EBCT; SP000097527; SP000097528

or can be received from an external master (Slave Mode). Data width, shift direction,
clock polarity and phase are programmable. This allows communication with SPI-
compatible devices. Transmission and reception of data is double-buffered. A shift clock
generator provides the SSC with a separate serial clock signal. One slave select input is
available for Slave Mode operation. Eight programmable slave select outputs (chip
selects) are supported in Master Mode. The I/O lines of the SSC0 module are connected
to dedicated device pins while the SSC1 module I/O lines are wired with general purpose
I/O port lines.
Features
•
•
•
•
•
•
•
•
Data Sheet
Master and Slave Mode operation
– Full-duplex or half-duplex operation
– Automatic pad control possible
Flexible data format
– Programmable number of data bits: 2 to 16 bits
– Programmable shift direction: LSB or MSB shift first
– Programmable clock polarity: Idle low or high state for the shift clock
– Programmable clock/data phase: data shift with leading or trailing edge of the shift
Baud rate generation from 37.5 Mbit/s to 572.2 Bit/s (@ 75 MHz module clock)
Interrupt generation
– On a transmitter empty condition
– On a receiver full condition
– On an error condition (receive, phase, baud rate, transmit error)
Flexible SSC pin configuration
One slave select input SLSI in slave mode
Eight programmable slave select outputs SLSO in Master Mode
– Automatic SLSO generation with programmable timing
– Programmable active level and enable control
SSC0 with 8-stage receive FIFO (RXFIFO) and 8-stage transmit FIFO (TXFIFO)
– Independent control of RXFIFO and TXFIFO
– 2- to 16-bit FIFO data width
– Programmable receive/transmit interrupt trigger level
– Receive and Transmit FIFO filling level indication
– Overrun error generation
– Underflow error generation
clock
51
Functional Description
V1.0, 2008-04
TC1796