ZU-M2242S3R2 Panasonic - ATG, ZU-M2242S3R2 Datasheet - Page 12

• Manufacturer Part Number: ZU-M2242S3R2
• Description: CARD READER HALF INSERT RS-232C
• Manufacturer: Panasonic - ATG

Specifications of ZU-M2242S3R2

• Card Reader Type: Magnetic, Push/Pull
• Interface: RS232C
• Card Read/write Type And Tracks: Magnetic - Read Tracks 1,2
• Card Reading Direction: Insertion/Ejection
• Card Standard: ISO 1, ISO 2
• Card Speed: 10 ~ 120 cm/s
• Supply Voltage: 5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PCR225

12. CAUTIONS ON USE
12.1 During installation
12.2 During use
Please be noted that we do not guarantee proper performance of the card reader if it is used other
than the indicated specification range.
(1) Do not drop or bump anything against the card reader. Otherwise, failure may be the result.
(2) Do not touch the P.C.B. with bare hands.
(3) Be sure to install on a flat surface so as to prevent any force to be applied to the card reader
(4) Avoid installing the Card Reader in the following environment.
(1) Be sure to use a card which conforms to ISO standard.
(2) Card operation speed should be within the specification range. Forced stop or
(3) Store the card with caution to prevent dirt, scratch and distortion. No foreign
(4) Insert a cleaning card and clean the head periodically to prevent wearing of
(5) Enviroment conditions such as external noise or electrostatics etc. may affect
change of speed during the card operation may cause a read error. Appropriate
speed to maintain stable operation is 30 cm/s to 60 cm/s.
matter should be stuck on the magnetic stripe surface. Use of such card may
result in a read error.
the magnetic head. Head cleaning using the cleaning card should be performed
about once a week if the room is not dusty.
operation of the card reader and interface. Check the level of noise resistance
and electrostatic resistance of your factory before using the card reader.
during installation.
In the case that the card readers are used in the environment full of dust etc., the life time
of the magnetic head and mechanism for transferring cards will decrease.
* Watery, humid or dusty place.
* Near machines which generate magnetic field or inducted noise.
* Place which gets direct sunlight.
(Printer ,LED display, CRT etc.)
- 9 -