ZU-M2242S3R2 Panasonic - ATG, ZU-M2242S3R2 Datasheet - Page 7

• Manufacturer Part Number: ZU-M2242S3R2
• Description: CARD READER HALF INSERT RS-232C
• Manufacturer: Panasonic - ATG

Specifications of ZU-M2242S3R2

• Card Reader Type: Magnetic, Push/Pull
• Interface: RS232C
• Card Read/write Type And Tracks: Magnetic - Read Tracks 1,2
• Card Reading Direction: Insertion/Ejection
• Card Standard: ISO 1, ISO 2
• Card Speed: 10 ~ 120 cm/s
• Supply Voltage: 5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: PCR225

7. ENVIRONMENTAL CHARACTERISTICS
8. HOST RS 232 COMMANDS
7.1 Operating temperature Range : -10
7.2 Operating humidity Range
7.3 Storage temperature Range
7.4 Storage humidity Range
7.5 Vibration
7.6 Shock durability
7.7 Others
8.1 General Description
8.2 UCIMAG Configuration Commands
All command strings begin with a “:” as shown and end with [CR] (not shown)
[CR] = ASCII carriage return character, 0DH.
[LF] = ASCII line feed character, 0AH.
<sh> = high digit of 8 bit hexadecimal checksum
<sl> = low digit of 8 bit hexadecimal checksum
Mode : Polling mode
Configuration – Saved in EEPROM.
:Bx
:Ab
:Sb
* Test procedure : Place the card reader in the standard environment (temperature:20
if Autoclear = 1, UCIMAG will automatically clear track buffers after sending track data.
User will NOT be able to poll data again.
If Autoclear = 0, data will remain in buffer until track clear command is sent.
Send the CA command and clear previous data in the buffer surely before reading track data.
if Autosend = 1, UCIMAG will automatically send track data as soon as card has been
inserted, user does not have to poll data.
Auto Send Mode (default)
- Change Baud rate x=3-> 9600, x=4->19200
- Auto clear bit, if b=0 disable, if b=1 enable
- Auto send bit, if b=0 disable, if b=1 enable
humidity:35 % to 60 %RH). Leave it for 12 hours, and measure the functions.
Make sure no abnormality is found.
: 10 % to 90% RH (No condensation allowed)
: -20
: 10 % to 95 % RH(No condensation allowed)
: Make sure any source of noise that may deteriorate
the characteristics of the card reader is not present
around the card reader.
: Vibration sweep 10 Hz to 50 Hz/minute
: 294 m/s
X,Y,Z directions
(24hours)
o
o
C to +50
C to +60
2
- 4 -
(30 G)
o
o
C
C
o
C ± 5
o
C,