129-0701-302 Emerson Network Power, 129-0701-302 Datasheet - Page 221

• Manufacturer Part Number: 129-0701-302
• Description: CONN JACK TEST SHIELD RIGHT ANGL
• Manufacturer: Emerson Network Power
• Type: Tip Jackr

Specifications of 129-0701-302

• Gender: Female
• Plug/mating Plug Diameter: Standard
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Non-Insulated
• Contact Finish: Gold
• Contact Material: Beryllium Copper
• Body Material: TFE Fluorocarbon
• Operating Temperature: -65°C ~ 85°C
• Color: Silver
• Contact Plating: Gold
• Equipment Type: Shielded Test Jack
• Voltage Rating: 2000 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1290701302; J571

SMA Right Angle Solder Type
Plug for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
RG-405/U (.086 Semi-Rigid)
RG-402/U (.141 Semi-Rigid)
CABLE GROUP
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making certain that the
4. Solder body to cable using 60/40 tin/lead solder
5. Press end cap into body access port using .187
center conductor during strip operations.
cable jacket is butted against internal body shoul-
der and cable dielectric is started into cross hole.
Solder center conductor to contact using 60/40
tin/lead solder as shown. Use a minimum amount
of solder for a good joint.
as shown. Use a minimum of heat to minimize
cable dielectric growth. Any growth of cable
dielectric shall be flush with contact.
(4.75) dia. flat punch.
142-0693-101/106
142-0694-101/106
PART NO.
.145 (3.68)
.170 (4.32)
“A”
.075 (1.90)
.105 (2.67)
“B”
221