129-0701-302 Emerson Network Power, 129-0701-302 Datasheet - Page 223

• Manufacturer Part Number: 129-0701-302
• Description: CONN JACK TEST SHIELD RIGHT ANGL
• Manufacturer: Emerson Network Power
• Type: Tip Jackr

Specifications of 129-0701-302

• Gender: Female
• Plug/mating Plug Diameter: Standard
• Mounting Type: Through Hole, Horizontal
• Termination: Solder
• Insulation: Non-Insulated
• Contact Finish: Gold
• Contact Material: Beryllium Copper
• Body Material: TFE Fluorocarbon
• Operating Temperature: -65°C ~ 85°C
• Color: Silver
• Contact Plating: Gold
• Equipment Type: Shielded Test Jack
• Voltage Rating: 2000 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Color: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1290701302; J571

SMA Solder Type Straight
Plugs for Semi-Rigid Cable
Connectivity Solutions
Tel: [phone]
•
Fax: [phone]
Assembly Instructions
•
www.EmersonNetworkPower.com/connectivity
INCHES (MILLIMETERS) • CUSTOMER DRAWINGS AVAILABLE ON REQUEST
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Insert cable into body making sure cable
4. Thread coupling nut over body.
center conductor. Bevel the cable center con-
ductor per contact detail of SMA interface on
page 24. Slide coupling nut onto cable as
shown.
jacket is flush with front of body. Solder body
to cable. Use a minimum amount of heat to
minimize cable insulation movement. Trim
expanded insulation flush with front of body
or fixture body and cable during soldering to
prevent cable insulation expansion.
(.141 Semi-Rigid)
CABLE GROUP
RG-402/U
142-0694-011
142-0694-016
PART NO.
223