XBP09-DMDK Digi International, XBP09-DMDK Datasheet - Page 3

• Manufacturer Part Number: XBP09-DMDK
• Description: KIT STARTER PROMESH XBEE PRO
• Manufacturer: Digi International
• Series: XBEE-PRO™r
• Type: Transceiver, XBeePror

Specifications of XBP09-DMDK

• Frequency: 900MHz
• Wireless Frequency: 900 MHz
• Interface Type: RS-232, USB, UART
• Modulation: FHSS
• Security: 128 bit AES
• Operating Voltage: 3.3 V
• Output Power: 50 mW
• Antenna: RPSMA
• For Use With/related Products: Xbee-PRO Modules
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 602-1130

1. Restart the Range Test.
2. Move the remote further away from the base until the signal is lost.
3. Assemble and power on another module and interface board.
4. Place this radio halfway between the remote and the base.
The intermediate radio bridges the gap between the remote and the base and reestablishes
communication. The network has “self-healed” by redirecting communications as soon
as a pathway becomes available. The radios are configured for broadcast mode so they can
route information and communicate with one another automatically.
1. Launch the X-CTU Software: (Start > Programs > Digi > X-CTU)
2. Under the “PC Settings” tab [Figure 2], select the PC serial COM port
3. Verify that the baud rate and data settings match the internal settings of the radios.
4. Select the “Range Test” tab [Figure 3].
5. (Optional) Check the “RSSI” checkbox to enable Received Signal Strength Indicator.
6. Click “Start” to begin the range test.
7. Move the remote away from the base to find the maximum range of the wireless link.
8. Click “Stop” to end the range test.
EXTEND THE NETWORK
that will be used. The standard COM port for the 9-pin serial port is COM 1. The USB
ports will be labeled as Digi PKG-U Serial Port Adapters and are assigned a number
based on your PC's settings.
The default settings for the radios are Baud Rate: 9600, Flow Control: NONE, Data
Bits: 8, Parity: NONE, and Stop Bits: 1.
The RSSI value indicates the signal strength of the last packet that the radio received.
modules.