BR-EVAL2.0 BlueRadios Inc, BR-EVAL2.0 Datasheet - Page 42

• Manufacturer Part Number: BR-EVAL2.0
• Description: EVAL KIT BLUETOOTH VER2.0
• Manufacturer: BlueRadios Inc
• Type: Bluetooth V 2.0r

Specifications of BR-EVAL2.0

• Frequency: 2.4GHz
• For Use With/related Products: Bluetooth
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 822-1001

7173 S. Havana Street, Suite 600
sending any AT commands.
Function: Configures connection, comm, unconnected UART and default service
modes.
Format: ATSW25,<Power-Up Connection Mode>,<Comm Mode>,<Unconnected UART Mode>,
<Default Service Profile>
Parameters:
Factory Default: Connection Mode = 0, Comm Mode = 1, Unconnected UART Mode =
0, Default Service Profile = 0
EXAMPLE:
Read Using: ATSI,7
Notes:
TYPE :
REPLY:
Power-Up Connection Mode:
Comm Mode:
Unconnected UART Mode:
Default Service Profile: This field has no longer has any effect, it can
just be set to 0.
command.
Requires a reset for the settings to go into affect.
*Auto-Connect Master always connects using the highest available
channel.
**In idle mode the radio is neither slave nor master and draws 1.6mA of
current but you can not communicate over the Bluetooth link in this
state only through the TX & RX hardware UART.
0 = Slave
1 = Auto-Master (Set ATSMA Command First)*
2 = Idle Mode**
3 = Slave Undiscoverable
5 = Repeater (Set ATSMA Command First)***
6 = Mesh Configuration
7 = OPP Server (See FTP and OPP Modes Section for more info)
8 = FTP Server (See See FTP and OPP Modes Section for more info)
0 = Fast Data****
1 = Data
2 = Command
0 = Allow Data to Pass While Unconnected
1 = Ignore Data While Unconnected
ATSW25,0,1,0,0<cr>
<cr_lf>OK<cr_lf>
OR
<cr_lf>ERROR<cr_lf>
If none available it will continue to retry.
www.BlueRadios.com
•
Englewood, CO 80112
Service profile UUIDs are now set using the ATSSNC
Copyright © 2002-2008
BlueRadios, Inc.
Page 42 of 103
//Slave radio connects in fast data mode
•
Tel [phone]
BR-AT_COMMANDS-100 Rev. 3.6.2.1.4.0
•
[e-mail]