BR-EVAL2.0 BlueRadios Inc, BR-EVAL2.0 Datasheet - Page 62

• Manufacturer Part Number: BR-EVAL2.0
• Description: EVAL KIT BLUETOOTH VER2.0
• Manufacturer: BlueRadios Inc
• Type: Bluetooth V 2.0r

Specifications of BR-EVAL2.0

• Frequency: 2.4GHz
• For Use With/related Products: Bluetooth
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 822-1001

Golden Receive Power Range
The lower threshold level of the Golden Receive Power Range corresponds to a receive power between -56 dBm
and 6 dB above the actual sensitivity of the receiver. The upper threshold level is 20 dB above the lower threshold
level to an accuracy of +/-6 dB.
3.7.4
XPARK
RSSI
7173 S. Havana Street, Suite 600
RSSI and Link Quality
GET RSSI VALUE
Function: This command is used to obtain the RSSI value for an open
connection on channel 0.
connection to a peer device.
Format: ATRSSI
Return Parameters: <RSSI Value>
EXAMPLE:
Notes:
EXIT PARK
Function: Tells the radio to exit the park mode.
Format: ATXPARK
EXAMPLE:
Note: Unit will immediately exit park.
TYPE :
REPLY:
TYPE :
REPLY:
RSSI Value is in hex, typically from -10 to +31 in integer dB value.
Allow 7 seconds for the slave to drop its average current draw from
45mA to 3mA and go into PARK.
radio go back to full operation within 5msec of the first character
for 7 seconds before going back into PARK mode without subsequent
data.
BlueRadios Module only supports one connection.
Both units are required to support park.
both Master and Slave to go into affect only during an active
Bluetooth connection.
ATRSSI<cr>
<cr_lf>OK<cr_lf>
<cr_lf>+00<cr_lf>
<cr_lf>NO
ATXPARK<cr>
<cr_lf>OK<cr_lf>
OR
<cr_lf>NO
The Slave will remain connected to the Master because the
www.BlueRadios.com
•
CARRIER<cr_lf>
CARRIER<cr_lf>
Englewood, CO 80112
This is a parameter associated with the ACL
Copyright © 2002-2008
BlueRadios, Inc.
The order does not matter.
Page 62 of 103
Any UART traffic will cause the Slave
•
Tel [phone]
BR-AT_COMMANDS-100 Rev. 3.6.2.1.4.0
Park request is sent from
•
[e-mail]