BR-EVAL2.0 BlueRadios Inc, BR-EVAL2.0 Datasheet - Page 84

• Manufacturer Part Number: BR-EVAL2.0
• Description: EVAL KIT BLUETOOTH VER2.0
• Manufacturer: BlueRadios Inc
• Type: Bluetooth V 2.0r

Specifications of BR-EVAL2.0

• Frequency: 2.4GHz
• For Use With/related Products: Bluetooth
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 822-1001

7.2
From power up:
Note: This command sequence assumes the radio is in factory default in which it automatically comes up and is
connectable as a Slave from a Master request.
To get out of Data Mode and check status:
7.3
Master Radio:
7173 S. Havana Street, Suite 600
1) Perform an inquiry and search for Slave Bluetooth device with a PC or other embedded unit.
2) Send a connection request from PC or embedded device to the Slave.
3) Wait for a connection
4) Send Data.
1) Delay at least 50 milliseconds; this could be less or more.
2) Check Status, perform a Disconnect …etc.
Slave Command Sequence
Audio and Data Connection (From Master to Remote Slave)
Reply:<cr_lf>CONNECT,{SLAVE
Sent :
Reply:<cr_lf>OK<cr_lf>
Perform hardware or software reset for the above changes to take effect on Master radio
Sent : ATDM,{SLAVE
Reply:<cr_lf>OK<cr_lf>
Reply:<cr_lf>CONNECT,{SLAVE
“You can now send data back and fourth between the two units”
Sent :
Reply:<cr_lf>OK<cr_lf>
Sent :
Reply:<cr_lf>ESCO
Sent :
Reply:<cr_lf>OK<cr_lf>
“You can now send data over SPP and simultaneously talk over the SCO audio channel”
Sent :
Reply:<cr_lf>OK<cr_lf>
Sent :
Reply:<cr_lf>OK<cr_lf>
Reply:<cr_lf>DISCONNECT<cr_lf>
Reply:<cr_lf>SCO
Reply:<cr_lf>BlueRadios
Sent :
Reply:<cr_lf>OK<cr_lf>
ATSW25,1,1,0,0<cr>
+++<cr>
ATDESCO<cr_lf>
ATMD<cr>
+++<cr>
ATDH<cr>
AT<cr>
DISCONNECT<cr_lf>
CONNECT<cr_lf>
ADDRESS},1101<cr>
AT<cr_lf>
www.BlueRadios.com
•
Englewood, CO 80112
ADDRESS}<cr_lf>
ADDRESS}<cr_lf>
Copyright © 2002-2008
BlueRadios, Inc.
Page 84 of 103
// Set ConnectMode Master & data mode
// Default escape sequence of characters
•
// Serial Port Profile
// SPP Connected
// Dial Audio ESCO
// Audio channel connected
// SPP disconnected
// audio channel disconnected
Tel [phone]
// SPP Connected
// Place back into Data mode
// Hang up Audio SCO & SP P
BR-AT_COMMANDS-100 Rev. 3.6.2.1.4.0
•
[e-mail]