STEVAL-IFS013V2 STMicroelectronics, STEVAL-IFS013V2 Datasheet - Page 8

• Manufacturer Part Number: STEVAL-IFS013V2
• Description: ZIGBEE USB DONGLE EVAL KIT
• Manufacturer: STMicroelectronics
• Type: Transceiver, ZigBeer

Specifications of STEVAL-IFS013V2

• Frequency: 2.4GHz
• For Use With/related Products: STM32, SPZB260-PRO
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10371

Getting started
3.4.1
3.4.2
Note:
3.4.3
8/18
Power supply
The USB to ZigBee dongle evaluation board is directly supplied by the USB connector (bus-
powered) and therefore does not require an external voltage supply.
STM32 JTAG interface
The 8-pin connector CN3 must be connected to a programming tool in order to program or
erase the microcontroller Flash memory.
For further information, please refer to both the Reference manual RM0008 - “Low-,
medium- and high-density STM32F101xx, STM32F102xx and STM32F103xx advanced
ARM-based 32-bit MCUs” and the Programming manual PM0042 - “STM32F10xxx Flash
programming”, available online from www.st.com/mcu.
The USB cable must be plugged in to supply the board with voltage.
In order to program the integrated Flash and debug the software application within the
SPZB260-PRO, a synchronous serial interface, known as SIF, connects either Ember's™
InSight™ Adapter (ISA) or Ember's USB link programmer directly to the XAP2b core and
integrated memory bus. The SIF is a synchronous port which operates in a similar
command/response manner as JTAG. It uses four, dedicated pins (SIF_CLK, SIF_MISO,
SIF_MOSI and nSIF_LOAD) from the SPZB260-PRO. This interface is available through
optional connector CN1.
SPZB260-PRO debug and programming interface (SIF)
Doc ID 15114 Rev 2
UM0602