MC13201FC Freescale Semiconductor, MC13201FC Datasheet - Page 2

• Manufacturer Part Number: MC13201FC
• Description: IC TXRX RF 2.4GHZ 32-QFN
• Manufacturer: Freescale Semiconductor

Specifications of MC13201FC

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: AMR, HID, HVAC, ISM
• Power - Output: -27dBm ~ 3dBm
• Sensitivity: -91dBm
• Voltage - Supply: 2 V ~ 3.4 V
• Current - Receiving: 37mA
• Current - Transmitting: 30mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 32-QFN
• Operating Supply Voltage: 2.7 V
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

For more detailed information about MC13201 operation, refer to the MC13201 Reference Manual,
(MC13201RM).
Applications include, but are not limited to, the following:
The transceiver includes a low noise amplifier, 1.0 mW power amplifiers (PA), onboard RF
transmit/receive (T/R) switch for single port use, PLL with internal voltage controlled oscillator (VCO),
on-board power supply regulation, and full spread-spectrum encoding and decoding. The device supports
250 kbps Offset-Quadrature Phase Shift Keying (O-QPSK) data in 2.0 MHz channels with
5.0 MHz channel spacing per the 802.15.4 Standard. The SPI port and interrupt request output are used for
receive (RX) and transmit (TX) data transfer and control.
2
2
•
•
•
•
•
•
•
•
•
Residential and commercial automation
— Lighting control
— Security
— Access control
— Heating, ventilation, air-conditioning (HVAC)
— Automated meter reading (AMR)
Industrial Control
— Asset tracking and monitoring
— Homeland security
— Process management
— Environmental monitoring and control
— HVAC
— Automated meter reading
Health Care
— Patient monitoring
— Fitness monitoring
Consumer
— Human interface devices (keyboard, mice, etc.)
— Remote control
— Wireless toys
Features
Recommended power supply range: 2.0 to 3.4 V
Fully compliant 802.15.4 Standard transceiver supports 250 kbps O-QPSK data in 5.0 MHz
channels and full spread-spectrum encode and decode
Operates on one of 16 selectable channels in the 2.4 GHz band
-1 to 0 dBm nominal output power, programmable from -27 dBm to +3 dBm typical
Receive sensitivity of <-91 dBm (typical) at 1% PER, 20-byte packet, much better than the
802.15.4 Standard of -85 dBm
MC13201 Technical Data, Rev. 1.3,
Freescale Semiconductor