XB24-BUIT-004 Digi International/Maxstream, XB24-BUIT-004 Datasheet - Page 89
![no-image](/images/no-image-200.jpg)
XB24-BUIT-004
Manufacturer Part Number
XB24-BUIT-004
Description
MODULE 802.15.4 SER 2 U.FL CONN
Manufacturer
Digi International/Maxstream
Series
XBee™r
Datasheet
1.XB24-BPDK.pdf
(91 pages)
Specifications of XB24-BUIT-004
Frequency
2.4GHz
Data Rate - Maximum
250kbps
Modulation Or Protocol
802.15.4
Applications
Home/Building Automation, Industrial Control, ZigBee™
Power - Output
2 mW (3 dBm)
Sensitivity
-96dBm
Voltage - Supply
2.1 V ~ 3.6 V
Current - Receiving
38mA
Current - Transmitting
35mA
Data Interface
PCB, Through Hole
Antenna Connector
U.FL
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Memory Size
-
XBee ZNet 2.5/XBee‐PRO ZNet 2.5 ZigBee OEM RF Modules v1.x4x
XBee ZNet 2.5 RF Module
XBee PRO ZNet 2.5 RF Module
Canada (IC)
Transmitters for Detachable Antennas
Detachable Antenna
Antenna Type: Omni-Directional
RF module was tested and approved with 15 dBi antenna gain with 1 dB cable-loss (EIRP Maimum
of 14 dBm). Any Omni-Directional type antenna with 14 dBi gain or less can be used with no
cable-loss.
Antenna Type: Flat Panel
RF module was tested and approved with 19 dBi antenna gain with 4.8 dB cable-loss (EIRP
Maimum of 14.2 dBm). Any Flat Panel type antenna with 14.2 dBi gain or less can be used with no
cable-loss.
The following antennas have been tested and approved for use with the embedded XBee ZNet 2.5
RF Module:
The following antennas have been tested and approved for use with the embedded XBee PRO ZNet
2.5 RF Module:
Labeling Requirements
Labeling requirements for Industry Canada are similar to those of the FCC. A clearly visible label
on the outside of the final product enclosure must display the following text:
The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts
FCC test report or CISPR 22 test report for compliance with ICES-003.
If it contains an XBee PRO ZNet 2.5 OEM Module, the clearly visible label on the outside of the final
product enclosure must display the following text:
The integrator is responsible for its product to comply with IC ICES-003 & FCC Part 15, Sub. B -
Unintentional Radiators. ICES-003 is the same as FCC Part 15 Sub. B and Industry Canada accepts
FCC test report or CISPR 22 test report for compliance with ICES-003.
This device has been designed to operate with the antennas listed in table A-3 and having a
maximum of 17.5 dB. Antennas not included in this list or having a gain greater than 17.5 dB are
strictly prohibited for use with this device. The required antenna impedance is 50
To reduce potential radio interference to other users, the antenna type and gained shuold be so
chosen that the equivaleny istropically radiated power (e.i.r.p.) is not more than permitted for
successful communication
© 2008 Digi International, Inc.
- Dipole (2.1 dBi, Omni-directional, Articulated RPSMA, Digi part number A24-HABSM)
- Chip Antenna (-1.5 dBi)
- Attached Monopole Whip (1.5 dBi)
- Dipole (2.1 dBi, Omni-directional, Articulated RPSMA, Digi part number A24-HABSM)
- Chip Antenna (-1.5 dBi)
- Attached Monopole Whip (1.5 dBi).
Contains Model XBee ZNet 2.5 Radio, IC: 4214A-XBEE2
Contains Model XBee PRO ZNet 2.5 Radio, IC: 1846A-XBEEPRO2
Ω
88