XC09-009NSC Digi International/Maxstream, XC09-009NSC Datasheet - Page 15
![no-image](/images/no-image-200.jpg)
XC09-009NSC
Manufacturer Part Number
XC09-009NSC
Description
MOD RF 900MHZ 9600BPS W/RPSMA
Manufacturer
Digi International/Maxstream
Series
9XCite™r
Specifications of XC09-009NSC
Frequency
900MHz
Data Rate - Maximum
9.6kbps
Modulation Or Protocol
FHSS, FSK
Power - Output
6dBm
Sensitivity
-108dBm
Voltage - Supply
2.85 V ~ 5.5 V
Current - Receiving
45mA
Current - Transmitting
55mA
Data Interface
PCB, Through Hole
Antenna Connector
RP-SMA
Operating Temperature
0°C ~ 70°C
Package / Case
Module
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Applications
-
Memory Size
-
9XCite™ OEM RF Module – Product Manual v2.1 [2007.01.04]
3. RF Module Configuration
3.1. Command and Parameter Types
3.1.1. AT Commands
3.1.2. Non-AT Settable Parameters (X-CTU Software configurable only)
The following versions of the XCite RF Modem are available:
XCite Modems can operate in both Single Channel and Hopping modes. Mode is selectable using
the "Function Set" dropdown list of the "XCite Configuration" tab of the MaxStream-provided X-
CTU Software.
The XCite Module is shipped with a unique parameter set in its memory. Parameters within the set
are organized under the following categories: AT Commands & Non-AT Settable Parameters.
AT Commands can be changed at any time by entering AT Command Mode and sending commands
to the modem.
AT Commands can be modified using the any of the following means:
Non-AT Settable Parameters can only be adjusted using the MaxStream-provided X-CTU Software.
To modify Non-AT Settable Parameter, connect the module to the serial com port of a PC (interface
board is necessary for RS-232 connection) and modify parameter values through the X-CTU Soft-
ware interface. These parameters enable features that need to be set before the module is used in
the field.
Non-AT Settable Parameters can only be modified using the following means:
© 2007 MaxStream, Inc.
• 900 MHz, 9600 Baud (RF data rate), Hopping Channel Mode
• 900 MHz, 9600 Baud, Single Channel mode
• 900 MHz, 38400 Baud, Hopping Channel mode
• 900 MHz, 38400 Baud, Single Channel mode
• X-CTU Software "Modem Configuration" tab
• X-CTU Software "Terminal" tab
• Terminal software program (such as "HyperTerminal")
• Microcontroller
• X-CTU Software "Modem Configuration" tab
15