MF1PLUS8001DA4/03, NXP Semiconductors, MF1PLUS8001DA4/03, Datasheet - Page 8
![IC SMART CARD 4KB EEPROM MOA4](/photos/26/96/269610/sot500-1_sml.jpg)
MF1PLUS8001DA4/03,
Manufacturer Part Number
MF1PLUS8001DA4/03,
Description
IC SMART CARD 4KB EEPROM MOA4
Manufacturer
NXP Semiconductors
Series
MIFARE PLUS™r
Datasheet
1.MF1PLUS6001DUD03.pdf
(20 pages)
Specifications of MF1PLUS8001DA4/03,
Rf Type
Read / Write
Frequency
13.56MHz
Features
ISO14443-3, 4KB EEPROM
Package / Case
PLLMC
Security
MIFARE CRYPTO1, AES
Product
Smart Card
Data Rate
848 Kbps
Antenna
On-Board
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
NXP Semiconductors
MF1PLUSX0Y1_SDS_31
Product short data sheet
PUBLIC
8.1.6 Originality function
8.2.1 Backwards compatibility protocol
8.2 Card activation and communication protocol
The originality function is implemented by an AES authentication with the originality key.
The authentication is performed in ISO/IEC 14443-4 protocol layer.
The ISO/IEC 14443-3 anticollision mechanism allows for simultaneous handling of
multiple PICCs in the field. The anticollision algorithm selects each PICC individually and
ensures that execution of a transaction with a selected PICC is performed correctly
without data corruption from other PICCs in the field.
There are three different versions of the PICC. The first two have the UID programmed
into a locked part of the NV-memory reserved for the manufacturer:
Due to security and system requirements, these bytes are write-protected after being
programmed by the PICC manufacturer at production.
The third version has a pseudo-unique ID according to ISO/IEC 14443-3 and uses the
XFh ID range.
The customer must decide which UID length to use when ordering the product, see
Table 2
During personalization, the PICC can be configured to support Random ID in security
level 3. The user can configure whether Random ID or fixed UID shall be used. According
to ISO/IEC 14443-3 the first anticollision loop (see
Tag 08h, the 3-byte Random Number and the BCC, if Random ID is used. The retrieval of
the UID in this case can be done using the Virtual Card Support Last command, see
Ref. 3
The backwards compatibility of this product, as used in security level 1 and security
level 2, runs on the same protocol layer as MIFARE Classic 1K and MIFARE Classic 4K.
The protocol is formed out of the following components:
The following security levels can run on this protocol:
•
•
•
•
•
•
•
•
•
the first is a unique 7-byte serial number
the second is a unique 4-byte serial number
Frame definition: according to ISO/IEC 14443-3
Bit encoding: according to ISO/IEC 14443-2
Error code handling: handling is proprietary as error codes are formatted in half bytes.
Command specification: commands are proprietary. Please use the specification as in
Ref. 1
MIFARE Plus as described in this document and in
Security Level 0
Security Level 1
Security Level 2
or by reading out block 0.
for ordering information.
and
Ref. 2
All information provided in this document is subject to legal disclaimers.
and the additional commands which are only implemented in
Rev. 3.1 — 19 April 2010
163531
Mainstream contactless smart card IC
Ref.
5) returns the Random Number
Ref.
MF1PLUSx0y1
3.
© NXP B.V. 2010. All rights reserved.
8 of 20