MF1PLUS8001DA4/03, NXP Semiconductors, MF1PLUS8001DA4/03, Datasheet - Page 9
![IC SMART CARD 4KB EEPROM MOA4](/photos/26/96/269610/sot500-1_sml.jpg)
MF1PLUS8001DA4/03,
Manufacturer Part Number
MF1PLUS8001DA4/03,
Description
IC SMART CARD 4KB EEPROM MOA4
Manufacturer
NXP Semiconductors
Series
MIFARE PLUS™r
Datasheet
1.MF1PLUS6001DUD03.pdf
(20 pages)
Specifications of MF1PLUS8001DA4/03,
Rf Type
Read / Write
Frequency
13.56MHz
Features
ISO14443-3, 4KB EEPROM
Package / Case
PLLMC
Security
MIFARE CRYPTO1, AES
Product
Smart Card
Data Rate
848 Kbps
Antenna
On-Board
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
NXP Semiconductors
MF1PLUSX0Y1_SDS_31
Product short data sheet
PUBLIC
8.2.2 ISO/IEC 14443-4 Protocol
8.3 Security level switching
8.4 Security level 0
The ISO/IEC 14443-4 Protocol (also known as T=CL) is used in many processor cards.
This protocol is used for the MIFARE Plus with the following security levels:
The MIFARE Plus X offers a unique feature to support migration from CRYPTO1 based
systems to AES based operation. The migration on the card-side is done using different
security levels supporting different cryptographic algorithms and protocols. There are four
security levels:
If the card is a L3 card the Commit Perso command will switch the card directly from
security level 0 to security level 3 instead of security level 1.
The security level switching (i.e. from security level 1 to security level 3) is performed
using the dedicated AES authentication switching keys.
The security level can only be switched from a lower to a higher level, never in the
opposite direction.
Security level 0 is the initial delivery configuration of the PICC. The card can be operated
either using the backwards compatibility protocol or the ISO/IEC 14443-4 protocol.
In this level, the card can be personalized including the programming of user data as well
as CRYPTO1 and/or AES keys. In addition, the originality function can be used.
The following mandatory AES keys must be written, using the Write Perso command
before the PICC can be switched to security level 1 or security level 3 (for L3 card).
•
•
•
•
•
•
•
•
Security Level 0: all commands
Security Level 1: only the security level switch and originality function
Security Level 2: updating AES keys and configuration blocks as well as the security
level switch and originality function
Security Level 3: all commands
Security level 0: initial delivery configuration, used for card personalization
Security level 1: backwards functional compatibility mode (with MIFARE Classic 1K
and MIFARE Classic 4K) with optional AES authentication
Security level 2: 3-Pass authentication based on AES followed by MIFARE CRYPTO1
authentication, communication secured by MIFARE CRYPTO1
The MIFARE CRYPTO1 uses session keys derived from the AES and MIFARE
CRYPTO1 authentication.
Security level 3: 3-Pass authentication based on AES, data manipulation commands
secured by AES encryption and an AES based MACing method
All information provided in this document is subject to legal disclaimers.
Rev. 3.1 — 19 April 2010
163531
Mainstream contactless smart card IC
MF1PLUSx0y1
© NXP B.V. 2010. All rights reserved.
9 of 20