EFM32G890F64 Energy Micro, EFM32G890F64 Datasheet - Page 5

• Manufacturer Part Number: EFM32G890F64
• Description: MCU 32BIT 64KB FLASH 112-BGA
• Manufacturer: Energy Micro
• Series: Geckor

Specifications of EFM32G890F64

• Core Processor: ARM® Cortex-M3™
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: EBI/EMI, I²C, IrDA, SmartCard, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, DMA, LCD, POR, PWM, WDT
• Number Of I /o: 90
• Program Memory Size: 64KB (64K x 8)
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.8 V
• Data Converters: A/D 8x12b, D/A 2x12b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 112-LFBGA
• Processor Series: EFM32G890
• Core: ARM Cortex-M3
• Data Bus Width: 32 bit
• Data Ram Size: 16 KB
• Interface Type: I2C, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 90
• Number Of Timers: 3
• Operating Supply Voltage: 1.8 V to 3.8 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

2.1.15 Low Energy Universal Asynchronous Receiver/Transmitter
(LEUART)
2.1.16 Timer/Counter (TIMER)
2.1.17 Real Time Counter (RTC)
2.1.18 Low Energy Timer (LETIMER)
2.1.19 Pulse Counter (PCNT)
2.1.20 Analog Comparator (ACMP)
2.1.21 Voltage Comparator (VCMP)
2.1.22 Analog to Digital Converter (ADC)
2010-12-17 - d0010_Rev1.20
The unique LEUART
a strict power budget. Only a 32.768 kHz clock is needed to allow UART communication up to 9600 baud/
s. The LEUART includes all necessary hardware support to make asynchronous serial communication
possible with minimum of software intervention and energy consumption.
The 16-bit general purpose Timer has 3 compare/capture channels for input capture and compare/Pulse-
Width Modulation (PWM) output. TIMER0 also includes a Dead-Time Insertion module suitable for motor
control applications.
The Real Time Counter (RTC) contains a 24-bit counter and is clocked either by a 32.768 kHz crystal
oscillator, or a 32 kHz RC oscillator. In addition to energy modes EM0 and EM1, the RTC is also available
in EM2. This makes it ideal for keeping track of time since the RTC is enabled in EM2 where most of
the device is powered down.
The unique LETIMER
in addition to EM1 and EM0. Because of this, it can be used for timing and output generation when most
of the device is powered down, allowing simple tasks to be performed while the power consumption of
the system is kept at an absolute minimum. The LETIMER can be used to output a variety of waveforms
with minimal software intervention. It is also connected to the Real Time Counter (RTC), and can be
configured to start counting on compare matches from the RTC.
The Pulse Counter (PCNT) can be used for counting pulses on a single input or to decode quadrature
encoded inputs. It runs off either the internal LFACLK or the PCNTn_S0IN pin as external clock source.
The module may operate in energy mode EM0 – EM3.
The Analog Comparator is used to compare the voltage of two analog inputs, with a digital output indi-
cating which input voltage is higher. Inputs can either be one of the selectable internal references or from
external pins. Response time and thereby also the current consumption can be configured by altering
the current supply to the comparator.
The Voltage Supply Comparator is used to monitor the supply voltage from software. An interrupt can
be generated when the supply falls below or rises above a programmable threshold. Response time and
thereby also the current consumption can be configured by altering the current supply to the comparator.
The ADC is a Successive Approximation Register (SAR) architecture, with a resolution of up to 12 bits
at up to one million samples per second. The integrated input mux can select inputs from 8 external
pins and 6 internal signals.
TM
TM
, the Low Energy UART, is a UART that allows two-way UART communication on
, the Low Energy Timer, is a 16-bit timer that is available in energy mode EM2
...the world's most energy friendly microcontrollers
5
www.energymicro.com