WM8731SEDS/V Wolfson Microelectronics, WM8731SEDS/V Datasheet - Page 33

• Manufacturer Part Number: WM8731SEDS/V
• Description: Audio CODECs Stereo Codec with H/P
• Manufacturer: Wolfson Microelectronics

Specifications of WM8731SEDS/V

• Interface Type: Serial (2-Wire or 3-Wire), I2S
• Resolution: 24 bit
• Operating Supply Voltage: 2.7 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Package / Case: SSOP-28
• Minimum Operating Temperature: - 40 C
• Number Of Channels: 2 ADC / 2 DAC
• Snr: 90 dB
• Thd Plus Noise: - 84 dB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

WM8731 / WM8731L
Figure 24 Side Tone Mode Schematic
w
MICIN
10k
VMID
50k
The bypass mode is selected under software control using the BYPASS microphone bit as shown in
Table 10. In true bypass mode, the output from the DAC (DACSEL) and (SIDETONE) should be de-
selected from the line output block. However this can also be used to sum the DAC output, Line
Inputs together and microphone inputs. The analogue line input and headphone output volume
controls and mutes are still operational in bypass mode. The 0dB gain setting is recommended for
the Line Input volume control to avoid distortion. The maximum signal at any point in the bypass path
must be no greater than 1.0V rms at AVDD = 3.3V, to avoid distortion. This amplitude tracks linearly
with AVDD. This means that if the DAC is producing a 1Vrms signal, and it is being summed with
1Vrms line BYPASS signal, the resulting LINEOP signal will be clipped.
Table 10 Bypass Mode Software Control
SIDETONE MODE
The WM8731/L also includes a side tone mode where the microphone input is routed to line and
headphone outputs. The scheme for this is shown in Figure 24.
The side tone mode allows the microphone input to be attenuated to the outputs for telephone and
headset applications.
Table 11 Side Tone Mode Table
0000100
Analogue
Audio Path
Control
0000100
Analogue
Audio Path
Control
REGISTER
REGISTER
ADDRESS
ADDRESS
10dB GAIN BOOST
VMID
3
5
7:6
BIT
BIT
INPUTS
FROM
FROM
BYPASS
SIDETONE
SIDEATT[1:0]
LINE
DAC
LABEL
LABEL
SIDETONE (ON)
BYPASS (OFF)
DACSEL (OFF)
1
0
00
VMID
DEFAULT
DEFAULT
Bypass Switch (Analogue)
1 = Enable Bypass
0 = Disable Bypass
Side Tone Switch (Analogue)
1 = Enable Side Tone
0 = Disable Side Tone
Side Tone Attenuation
11 = -15dB
10 = -12dB
01 = -9dB
00 = -6dB
LINEOUT
VMID
DESCRIPTION
DESCRIPTION
PD, Rev 4.8, April 2009
Production Data
HPOUT
33