IP4305CX4/LF/P,315 NXP Semiconductors, IP4305CX4/LF/P,315 Datasheet - Page 6

• Manufacturer Part Number: IP4305CX4/LF/P,315
• Description: IC ESD PROTECTION
• Manufacturer: NXP Semiconductors

Specifications of IP4305CX4/LF/P,315

• Product: Schottky Diodes
• Configuration: Dual
• Forward Voltage Drop: 0.25 V, 0.35 V, 0.45 V
• Maximum Reverse Leakage Current: 1 uA, 8 uA, +/- 50 uA, 80 uA
• Maximum Power Dissipation: 5 mW
• Operating Temperature Range: - 30 C to + 85 C
• Mounting Style: SMD/SMT
• Package / Case: WLCSP-4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
8. Legal information
[1]
[2]
[3]
Draft — The document is a draft version only. The content is still under
internal review and subject to formal approval, which may result in
modifications or additions. NXP Semiconductors does not give any
representations or warranties as to the accuracy or completeness of
information included herein and shall have no liability for the consequences
of use of such information.
Short data sheet — A short data sheet is an extract from a full data sheet
with the same product type number(s) and title. A short data sheet is
intended for quick reference only and should not be relied upon to contain
detailed and full information. For detailed and full information see the
relevant full datasheet, which is available on request via the local NXP
Semiconductors sales office. In case of any inconsistency or conflict with the
short data sheet, the full data sheet shall prevail.
.
General — Information in this document is believed to be accurate and
reliable. However, NXP Semiconductors does not give any representations
or warranties, expressed or implied, as to the accuracy or completeness of
such information and shall have no liability for the consequences of use of
such information.
Right to make changes — NXP Semiconductors reserves the right to make
changes to information published in this document, including without
limitation specifications and product descriptions, at any time and without
notice. This document supersedes and replaces all information supplied prior
to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed,
authorized or warranted to be suitable for use in medical, military, aircraft,
space or life support equipment, nor in applications where failure or
9. Contact information
For additional information, please visit:
For sales office addresses, send an email to:
<DOC_ID>
Product data sheet
Document status
Objective [short] data sheet
Preliminary [short] data sheet
Product [short] data sheet
8.1 Data sheet status
8.2 Definitions
8.3 Disclaimers
Please consult the most recently issued document before initiating or completing a design.
The term ‘short data sheet’ is explained in section “Definitions”.
The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product
status information is available on the Internet at URL http://www.nxp.com.
[1], [2]
Product status
Development
Qualification
Production
[3]
http://www.nxp.com
Definition
This document contains data from the objective specification for product development.
This document contains data from the preliminary specification.
This document contains the product specification.
[e-mail]
20 August 2009
Integrated dual Schottky diode array with ESD protection
malfunction of a NXP Semiconductors product can reasonably be expected
to result in personal injury, death or severe property or environmental
damage. NXP Semiconductors accepts no liability for inclusion and/or use of
NXP Semiconductors products in such equipment or applications and
therefore such inclusion and/or use is for the customer’s own risk.
Applications — Applications that are described herein for any of these
products are for illustrative purposes only. NXP Semiconductors makes no
representation or warranty that such applications will be suitable for the
specified use without further testing or modification.
Limiting values — Stress above one or more limiting values (as defined in
the Absolute Maximum Ratings System of IEC 60134) may cause permanent
damage to the device. Limiting values are stress ratings only and operation
of the device at these or any other conditions above those given in the
Characteristics sections of this document is not implied. Exposure to limiting
values for extended periods may affect device reliability.
Terms and conditions of sale — NXP Semiconductors products are sold
subject to the general terms and conditions of commercial sale, as published
at http://www.nxp.com/profile/terms, including those pertaining to warranty,
intellectual property rights infringement and limitation of liability, unless
explicitly otherwise agreed to in writing by NXP Semiconductors. In case of
any inconsistency or conflict between information in this document and such
terms and conditions, the latter will prevail.
No offer to sell or license — Nothing in this document may be interpreted
or construed as an offer to sell products that is open for acceptance or the
grant, conveyance or implication of any license under any copyrights, patents
or other industrial or intellectual property rights.
Notice: All referenced brands, product names, service names and
trademarks are the property of their respective owners.
8.4 Trademarks
IP4305CX4/LF (/P)
© NXP B.V. 2006. All rights reserved.
6 of 7