ISL9208EVAL2Z Intersil, ISL9208EVAL2Z Datasheet - Page 3

• Manufacturer Part Number: ISL9208EVAL2Z
• Description: EVAL BOARD 2 FOR ISL9208
• Manufacturer: Intersil

Specifications of ISL9208EVAL2Z

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Initial Testing
Setup
• Figure 4 shows a blue board that connects between a
Power Supply
Interconnect Board (blue
board, not provided in kit)
provides resistor divider
for generating cell
voltages).
If interested, please
contact Intersil for a blank
board.
power supply and the evaluation board. This board is not
provided in the kit, but is an example of an interface
connection that supports the connection of both a single
power supply (with resistor dividers) or separate power
(See Figure 4)
3
(3.3V)
METER 1
RGO (ISL9208)
FIGURE 4. ISL9208EVAL2Z EVALUATION BOARD TEST CONNECTION
GND
Application Note 1444
USBLINK:
(Optional)
USB to BKGD
• Before connecting the PC to the ISL9208EVAL2Z board
• Turn on the power to the board. Once power is turned on
supplies or battery cells. To obtain a blank interface board,
please contact your Intersil representative.
(through the USB to I
supply and then connect the power supply to the
ISL9208EVAL2Z board.
(or Li-ion cells are connected to the ISL9208EVAL2Z
board,) the RGO LED should light. Use Meter 1 to
measure the RGO voltage. It should read about 3.3V.
USB to I
DeVaSys:
TO PC:
2
C
BKGD CONNECT
2
C interface) turn off the power
AO (ISL9208)
(0V TO 2.3V)
December 15, 2008
METER 2
AN1444.0