DEMOBOARD TLE 6368 Infineon Technologies, DEMOBOARD TLE 6368 Datasheet - Page 5

• Manufacturer Part Number: DEMOBOARD TLE 6368
• Description: BOARD DEMO FOR TLE 6368
• Manufacturer: Infineon Technologies

Specifications of DEMOBOARD TLE 6368

• Main Purpose: DC/DC, Step Down with LDO
• Voltage - Input: 5.5 ~ 60 V
• Regulator Topology: Buck
• Board Type: Fully Populated
• Utilized Ic / Part: TLE6368
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Outputs And Type: -
• Power - Output: -
• Voltage - Output: -
• Current - Output: -
• Frequency - Switching: -
• Other names: DEMOBOARDTLE6368IN

1.4
Pin No.
11
12
13
14
15
16
17
20
21
22
23
24
25, 26
Data Sheet
Pin definitions and functions (cont’d)
Symbol
Q_T4
Q_T5
Q_T6
Q_LDO3
R3
R2
R1
C-
C+
CCP
SEL
Q_LDO2
FB/L_IN
Function
Voltage Tracker Output T4 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Tracker Output T5 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Tracker Output T6 tracked to Q_LDO1; bypass with a
1µF ceramic capacitor for stability. It is switched on and off by
SPI command. Keep open, if not needed.
Voltage Regulator Output 3; 3.3V or 2.6V output; output
voltage is selected by pin SEL (see also 2.2.2); For stability a
ceramic capacitor of 470nF to GND is sufficient.
Reset output 3, undervoltage detection for output Q_LDO3;
open drain output; an external pullup resistor of 10k
required
Reset output 2, undervoltage detection for output Q_LDO2;
open drain output; an external pullup resistor of 10k
required
Reset output 1, undervoltage detection for output Q_LDO1 and
watchdog failure reset; open drain output ; an external pullup
resistor of 10k is required
Charge pump capacitor connection; Add the fly-capacitor of
100nF between C+ and C-
Charge pump capacitor connection; Add the fly-capacitor of
100nF between C+ and C-
Charge Pump Storage Capacitor Output; Add the storage
capacitor of 220nF between pin CCP and GND.
Select Pin for output voltage adjust of Q_LDO2 and Q_LDO3
(see also 2.2.2)
Voltage Regulator Output 2; 3.3V or 2.6V output; output
voltage is selected by pin SEL (see also 2.2.2); For stability a
ceramic capacitor of 470nF to GND is sufficient.
Feedback and Linear Regulator Input; input connection for
the Buck converter output
5
Rev. 2.2, 2006-12-01
TLE 6368 / SONIC
is
is