STM32W108B-SK STMicroelectronics, STM32W108B-SK Datasheet - Page 18

• Manufacturer Part Number: STM32W108B-SK
• Description: STARTER KIT FOR STM32W108
• Manufacturer: STMicroelectronics
• Series: STM32r
• Type: MCUr

Specifications of STM32W108B-SK

• Featured Product: STM32 Cortex-M3 Companion Products
• Contents: Board
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32W108xx
• Kit Contents: Board
• Features: IEEE
• Mfg Application Notes: STM32W108 Adjacent Channel Rejection Measurements
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: *
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM32W108xx kits utilities and software tools
3
3.1
Note:
3.2
3.2.1
3.2.2
18/21
STM32W108xx kits utilities and software tools
stm32w_flasher utility
The stm32w_flasher utility allows you to download a binary file into the STM32W108xx
MB851 board. This utility comes with each software installer file. To download a binary
image, follow these steps:
1.
2.
3.
4.
5.
6.
where COMx is the virtual COM related to the connected MB851 board, and
file_name.bin/.s37 is the application image to be downloaded.
You can also use the stm32w_flasher utility through the JTAG programmer:
1. Fit the MB851 jumper P2 on position 5-6 (power via JTAG).
2. Plug the JTAG programmer to a PC USB port and to the board JTAG connector P4.
3. Open an DOS Window on your PC.
4. Go to the folder where the stm32w_flasher is located (tool or utility folder).
5. Type the following command: stm32w_flasher -f <file_name.bin/.s37> -r
Network analyzer
Perytons
To install the Perytons network analyzer, insert the related CD-ROM and follow the
installation instructions. To use the Perytons network analyzer, follow these steps:
1.
2.
3.
When a packet capture session is ongoing, the MB851 LEDs behave as follows:
A prebuilt analyzer binary image for Perytons is provided with each installer file.
Daintree
A binary image supporting the Daintree network analyzer is also available. No CD-ROM for
Daintree is delivered with the STM32W108xx kits. For more information refer to
http://www.daintree.net/.
Fit the MB851 jumper P2 on position 5-6 (power via USB).
Connect a mini USB cable to the MB851 mini USB connector and to a PC USB port.
Using the mouse, right-click on My Computer, select Manage, Device Manager, and
open Ports (COM & LPT) to display the related USB COMx port
Open an DOS Window on your PC
Go to the utilities folder which comes after the installation process
Type the following command: stm32w_flasher –p <COMx> -r –f <file_name.bin/.s37>
MB851 board labeled as "Analyzer“: fit jumper P2 on position 5-6 (power via USB) and
connect to a PC USB port.
Open the Perytons tool (from Start, Programs).
For instructions about how to start a packet capture session refer to the documentation
on the Perytons CD-ROM.
When data is sent to the PC LED D1 flashes for a short period.
LED D3 is the heartbeat LED
Doc ID 16999 Rev 2
UM0894