58483-1 Tyco Electronics, 58483-1 Datasheet

Crimp Tool Die

58483-1

Manufacturer Part Number
58483-1
Description
Crimp Tool Die
Manufacturer
Tyco Electronics
Series
PRO-CRIMPER IIr
Datasheet
1.58483-1.pdf (3 pages)

Specifications of 58483-1

Features
Hex / Military
Crimp Application
Coaxial
Connector Type
SMB
Crimp Handle
A9996-ND
Crimp Or Cable Size
RG/U-161, 174, 179, 187, 188, 316
Rf Series
SMB
Product
Tools & Accessories
Polarity
Normal
Impedance
50 Ohms
Termination Style
Crimp
Accessory
Hex Die Assembly
Body Style
Straight
Cable Type
RG 161, 174, 179, 187, 188, 188 Double Braid, RD 316
Contact Type
Crimp
Mounting Angle
Straight
For Use With
50 Ohm SMB RF/Coaxial Connectors
Lead Free Status / RoHS Status
na
Lead Free Status / RoHS Status
na, Not applicable / Not applicable
Other names
A9968
PRO–CRIMPER III Hand Tool Assembly 58499–1
consists of PRO–CRIMPER III Hand Tool Frame
354940–1 and Die Assembly 58483–1. The tool
assembly is used to crimp the ferrule of the
connectors listed in Figure 1. In this use, the die
assembly does not provide for crimping of the center
contact.
Read these instructions thoroughly before using the
tool assembly.
E
Figure 1
For additional information on the hand tool frame,
refer to 408–9930. Refer to the applicable connector
instruction sheet for assembly of the connector.
Reasons for reissue of this instruction sheet are
provided in Section 8, REVISION SUMMARY.
i
Dimensions in this instruction sheet are in
millimeters [with inches in brackets]. Figures are
not drawn to scale.

58483-1 Summary of contents

Page 1

... PRO–CRIMPER III Hand Tool Assembly 58499–1 consists of PRO–CRIMPER III Hand Tool Frame 354940–1 and Die Assembly 58483–1. The tool assembly is used to crimp the ferrule of the connectors listed in Figure 1. In this use, the die assembly does not provide for crimping of the center contact ...

Page 2

... PRO-CRIMPER III Hand Tool Assembly 58499-1 with Die Assembly 58483-1 2. DESCRIPTION (Figure 1) The tool frame features a stationary jaw and handle, a moving jaw, a moving handle, and an adjustable ratchet that ensures full crimping. The tool frame holds the die assembly. The die assembly consists of an indenter (stationary die) and an anvil (moving die) ...

Page 3

... CUSTOMER SERVICE (038–035) TYCO ELECTRONICS CORPORATION PO BOX 3608 HARRISBURG PA 17105–3608 Revisions to this instruction sheet include: S Updated document to corporate requirements Tyco Electronics Corporation 3.835 [.151 ...