58483-1 Tyco Electronics, 58483-1 Datasheet - Page 3

• Manufacturer Part Number: 58483-1
• Description: Crimp Tool Die
• Manufacturer: Tyco Electronics
• Series: PRO-CRIMPER IIr

Specifications of 58483-1

• Features: Hex / Military
• Crimp Application: Coaxial
• Connector Type: SMB
• Crimp Handle: A9996-ND
• Crimp Or Cable Size: RG/U-161, 174, 179, 187, 188, 316
• Rf Series: SMB
• Product: Tools & Accessories
• Polarity: Normal
• Impedance: 50 Ohms
• Termination Style: Crimp
• Accessory: Hex Die Assembly
• Body Style: Straight
• Cable Type: RG 161, 174, 179, 187, 188, 188 Double Braid, RD 316
• Contact Type: Crimp
• Mounting Angle: Straight
• For Use With: 50 Ohm SMB RF/Coaxial Connectors
• Lead Free Status / RoHS Status: na
• Lead Free Status / RoHS Status: na, Not applicable / Not applicable
• Other names: A9968

Ensure that the tool frame and dies are clean by
wiping them with a clean, soft cloth. Remove any
debris with a clean, soft brush. Do not use objects
that could damage any components. When not in use,
keep tool handles closed to prevent objects from
becoming lodged in the dies, and store in a clean, dry
area.
Inspection of the dies should be made on a regular
basis to ensure that they have not become worn or
damaged. Inspect the crimping sections for flattened,
chipped, worn, or broken areas. If damage or
abnormal wear is evident, the dies must be replaced.
Refer to Section 7, REPLACEMENT.
Rev
2. With a screwdriver, adjust the ratchet wheel
from the front of the tool.
3. Observe the ratchet adjustment wheel. If a
tighter crimp is required, rotate the adjustment
wheel counterclockwise to a higher–numbered
setting. If a looser crimp is required, rotate the
adjustment wheel clockwise to a lower–numbered
setting.
4. Re–assemble the lockscrew.
5. Make a sample crimp. If the crimp is acceptable,
the adjustment setting is correct. If the crimp is
unacceptable, continue to adjust the ratchet, and
again measure a sample crimp.
Ratchet
Adjustment
Wheel
Lockscrew
Screwdriver
Figure 4
Tyco Electronics Corporation
Figure 5 provides dimensions for the die openings.
Customer–replaceable parts are shown in Figure 1.
Available separately, Repair Kit 679221–1 includes a
replacement nut and a variety of pins, rings, screws,
and springs. If the dies are damaged or worn
excessively, they must be replaced. Order the repair
kit and replaceable parts through your representative,
or call 1–800–526–5142, or send a facsimile of your
purchase order to 717–986–7605, or write to:
Revisions to this instruction sheet include:
CUSTOMER SERVICE (038–035)
TYCO ELECTRONICS CORPORATION
PO BOX 3608
HARRISBURG PA 17105–3608
S Updated document to corporate requirements
2.667 [.105]
3.251 [.128]
Figure 5
3.835 [.151]
of 3