SC16C554BIB80 NXP Semiconductors, SC16C554BIB80 Datasheet - Page 30

• Manufacturer Part Number: SC16C554BIB80
• Description: IC, UART, QUAD, 16BYTE FIFO, 16C554
• Manufacturer: NXP Semiconductors

Specifications of SC16C554BIB80

• No. Of Channels: 4
• Data Rate: 5Mbps
• Supply Voltage Range: 2.25V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: LQFP
• No. Of Pins: 80
• Svhc: No SVHC (18-Jun-2010)
• Uart Features: Pin & Software Compatible, 16-Byte Transmit FIFO, Automatic Hardware Flow Control
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
SC16C554B_554DB
Product data sheet
7.3.2 FIFO mode
Table 11.
Bit
7:6
5:4
3
2
1
0
Symbol
FCR[7:6]
FCR[5:4]
FCR[3]
FCR[2]
FCR[1]
FCR[0]
FIFO Control Register bits description
All information provided in this document is subject to legal disclaimers.
5 V, 3.3 V and 2.5 V quad UART, 5 Mbit/s (max.) with 16-byte FIFOs
Description
RCVR trigger. These bits are used to set the trigger level for the receive
FIFO interrupt.
An interrupt is generated when the number of characters in the FIFO equals
the programmed trigger level. However, the FIFO will continue to be loaded
until it is full. Refer to
not used; initialized to logic 0
DMA mode select.
Transmit operation in mode ‘0’: When the SC16C554B/554DB is in the
16C450 mode (FIFOs disabled; FCR[0] = logic 0) or in the FIFO mode
(FIFOs enabled; FCR[0] = logic 1; FCR[3] = logic 0), and when there are no
characters in the transmit FIFO or Transmit Holding Register, the TXRDY
pin will be a logic 0. Once active, the TXRDY pin will go to a logic 1 after the
first character is loaded into the Transmit Holding Register.
Receive operation in mode ‘0’: When the SC16C554B/554DB is in
mode ‘0’ (FCR[0] = logic 0), or in the FIFO mode (FCR[0] = logic 1;
FCR[3] = logic 0) and there is at least one character in the receive FIFO, the
RXRDY pin will be a logic 0. Once active, the RXRDY pin will go to a logic 1
when there are no more characters in the receiver.
Transmit operation in mode ‘1’: When the SC16C554B/554DB is in FIFO
mode (FCR[0] = logic 1; FCR[3] = logic 1), the TXRDY pin will be a logic 1
when the transmit FIFO is completely full. It will be a logic 0 if one or more
FIFO locations are empty.
Receive operation in mode ‘1’: When the SC16C554B/554DB is in FIFO
mode (FCR[0] = logic 1; FCR[3] = logic 1) and the trigger level has been
reached, or a Receive Time-out has occurred, the RXRDY pin will go to a
logic 0. Once activated, it will go to a logic 1 after there are no more
characters in the FIFO.
XMIT FIFO reset.
RCVR FIFO reset.
FIFO enable.
logic 0 = set DMA mode ‘0’ (normal default condition)
logic 1 = set DMA mode ‘1’
logic 0 = no FIFO transmit reset (normal default condition)
logic 1 = clears the contents of the transmit FIFO and resets the FIFO
counter logic (the Transmit Shift Register is not cleared or altered). This
bit will return to a logic 0 after clearing the FIFO.
logic 0 = no FIFO receive reset (normal default condition)
logic 1 = clears the contents of the receive FIFO and resets the FIFO
counter logic (the Receive Shift Register is not cleared or altered). This bit
will return to a logic 0 after clearing the FIFO.
logic 0 = disable the transmit and receive FIFO (normal default condition)
logic 1 = enable the transmit and receive FIFO. This bit must be a 1
when other FCR bits are written to, or they will not be programmed.
Rev. 4 — 8 June 2010
Table
12.
SC16C554B/554DB
© NXP B.V. 2010. All rights reserved.
30 of 58