5M240ZT100C5N Altera, 5M240ZT100C5N Datasheet - Page 28

• Manufacturer Part Number: 5M240ZT100C5N
• Description: IC CPLD FLASH, 192, 7.5NS, 118.3MHZ, TQFP-100
• Manufacturer: Altera
• Series: MAX Vr

Specifications of 5M240ZT100C5N

• Cpld Type: FLASH
• No. Of Macrocells: 192
• No. Of I/o's: 79
• Propagation Delay: 7.5ns
• Global Clock Setup Time: 4.6ns
• Frequency: 118.3MHz
• Supply Voltage Range: 1.71V To 1.89V
• Rohs Compliant: Yes
• Programmable Type: In System Programmable
• Delay Time Tpd(1) Max: 7.5ns
• Voltage Supply - Internal: 1.71 V ~ 1.89 V
• Number Of Logic Elements/blocks: 240
• Number Of Macrocells: 192
• Number Of Gates: -
• Number Of I /o: 79
• Operating Temperature: 0°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2–22
MAX V Device Handbook
UFM Storage
Internal Oscillator
Each device stores up to 8,192 bits of data in the UFM block.
size, sector, and address sizes for the UFM block.
Table 2–3. UFM Array Size
There are 512 locations with 9-bit addressing ranging from 000h to 1FFh. The sector 0
address space is 000h to 0FFh and the sector 1 address space is from 100h to 1FFh. The
data width is up to 16 bits of data. The Quartus II software automatically creates logic
to accommodate smaller read or program data widths. Erasure of the UFM involves
individual sector erasing (that is, one erase of sector 0 and one erase of sector 1 is
required to erase the entire UFM block). Because sector erase is required before a
program or write operation, having two sectors enables a sector size of data to be left
untouched while the other sector is erased and programmed with new data.
As shown in
oscillator. The dedicated circuitry uses this oscillator internally for its read and
program operations. This oscillator's divide by 4 output can drive out of the UFM
block as a logic interface clock source or for general-purpose logic clocking. The
typical OSC output signal frequency ranges from 3.9 to 5.3 MHz, and its exact
frequency of operation is not programmable.
The UFM internal oscillator can be instantiated using the MegaWizard
Manager. You can also use the MAX II/MAX V Oscillator megafunction to instantiate
the UFM oscillator without using the UFM memory block.
5M40Z
5M80Z
5M160Z
5M240Z
5M570Z
5M1270Z
5M2210Z
Device
Figure
Total Bits
2–15, the dedicated circuitry within the UFM block contains an
8,192
8,192
8,192
8,192
8,192
8,192
8,192
2 (4,096 bits per sector)
2 (4,096 bits per sector)
2 (4,096 bits per sector)
2 (4,096 bits per sector)
2 (4,096 bits per sector)
2 (4,096 bits per sector)
2 (4,096 bits per sector)
Sectors
Address Bits
December 2010 Altera Corporation
Table 2–3
9
9
9
9
9
9
9
Chapter 2: MAX V Architecture
User Flash Memory Block
lists the data
™
Plug-In
Data Width
16
16
16
16
16
16
16