PIC24FJ256GB210-I/BG Microchip Technology, PIC24FJ256GB210-I/BG Datasheet - Page 328

• Manufacturer Part Number: PIC24FJ256GB210-I/BG
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, BGA-121
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GB210-I/BG

• Controller Family/series: PIC24
• No. Of I/o's: 84
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• No. Of Pwm Channels: 9
• Core Size: 16 Bit
• Program Memory Size: 256KB
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-TFBGA
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 96 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 5
• Operating Supply Voltage: 2.2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240021
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

PIC24FJ256GB210 FAMILY
REGISTER 26-3:
REGISTER 26-4:
DS39975A-page 328
bit 11-10
bit 9-8
bit 7-0
Note 1:
bit 23
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 23-16
bit 15-0
reserved
reserved
U-0
r-1
r-1
—
2:
3:
Unused in 64-pin devices, maintain at ‘1’.
Ensure that the SCLKI pin is made a digital input while using this configuration, see Table 10-2.
Regardless of WPCFG status, if WPEND = 1 or if WPFP corresponds to the Configuration Word’s page,
the Configuration Word’s page is protected.
WUTSEL<1:0>: Voltage Regulator Standby Mode Wake-up Time Select bits
11 = Default regulator start-up time is used
01 = Fast regulator start-up time is used
x0 = Reserved; do not use
SOSCSEL<1:0>: SOSC Selection Configuration bits
11 = Secondary oscillator is in Default (high drive strength) Oscillator mode
10 = Reserved; do not use
01 = Secondary oscillator is in Low-Power (low drive strength) Oscillator mode
00 = External clock (SCLKI) or Digital I/O mode
WPFP<7:0>: Write Protected Code Segment Boundary Page bits
Designates the 512 instruction words page boundary of the protected code segment.
If WPEND = 1:
Specifies the lower page boundary of the code-protected segment; the last page being the last
implemented page in the device.
If WPEND = 0:
Specifies the upper page boundary of the code-protected segment; Page 0 being the lower boundary.
Unimplemented: Read as ‘0’
Reserved: Always maintain as ‘1’
reserved
reserved
U-0
r-1
r-1
—
CW3: FLASH CONFIGURATION WORD 3 (CONTINUED)
CW4: FLASH CONFIGURATION WORD 4
r = Reserved bit
W = Writable bit
‘1’ = Bit is set
reserved
reserved
U-0
r-1
r-1
—
reserved
reserved
U-0
r-1
r-1
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
reserved
reserved
(2)
U-0
r-1
r-1
—
reserved
reserved
U-0
r-1
r-1
—
 2010 Microchip Technology Inc.
x = Bit is unknown
reserved
reserved
U-0
r-1
r-1
—
reserved
reserved
U-0
r-1
r-1
—
bit 16
bit 8
bit 0