PIC24FJ256GB210-I/BG Microchip Technology, PIC24FJ256GB210-I/BG Datasheet - Page 87

• Manufacturer Part Number: PIC24FJ256GB210-I/BG
• Description: IC, 16BIT MCU, PIC24F, 32MHZ, BGA-121
• Manufacturer: Microchip Technology
• Series: PIC® 24Fr

Specifications of PIC24FJ256GB210-I/BG

• Controller Family/series: PIC24
• No. Of I/o's: 84
• Ram Memory Size: 96KB
• Cpu Speed: 32MHz
• No. Of Timers: 5
• No. Of Pwm Channels: 9
• Core Size: 16 Bit
• Program Memory Size: 256KB
• Core Processor: PIC
• Speed: 32MHz
• Connectivity: I²C, IrDA, SPI, UART/USART, USB OTG
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 84
• Program Memory Type: FLASH
• Ram Size: 96K x 8
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Data Converters: A/D 24x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 121-TFBGA
• Processor Series: PIC24FJ
• Core: PIC
• Data Bus Width: 16 bit
• Data Ram Size: 96 KB
• Interface Type: I2C, SPI, UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 44
• Number Of Timers: 5
• Operating Supply Voltage: 2.2 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, DM240001, MA240021
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 24 Channel
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

REGISTER 6-1:
TABLE 6-1:
 2010 Microchip Technology Inc.
bit 2
bit 1
bit 0
Note 1:
TRAPR (RCON<15>)
IOPUWR (RCON<14>)
CM (RCON<9>)
EXTR (RCON<7>)
SWR (RCON<6>)
WDTO (RCON<4>)
SLEEP (RCON<3>)
IDLE (RCON<2>)
BOR (RCON<1>)
POR (RCON<0>)
Note:
2:
3:
Flag Bit
All of the Reset status bits may be set or cleared in software. Setting one of these bits in software does not
cause a device Reset.
If the FWDTEN Configuration bit is ‘1’ (unprogrammed), the WDT is always enabled, regardless of the
SWDTEN bit setting.
Re-enabling the regulator after it enters Standby mode will add a delay, T
Sleep. Applications that do not use the voltage regulator should set this bit to prevent this delay from
occurring.
All Reset flag bits may be set or cleared by the user software.
IDLE: Wake-up From Idle Flag bit
1 = Device has been in Idle mode
0 = Device has not been in Idle mode
BOR: Brown-out Reset Flag bit
1 = A Brown-out Reset has occurred
Note that BOR is also set after a Power-on Reset.
0 = A Brown-out Reset has not occurred
POR: Power-on Reset Flag bit
1 = A Power-on Reset has occurred
0 = A Power-on Reset has not occurred
RESET FLAG BIT OPERATION
RCON: RESET CONTROL REGISTER
Trap Conflict Event
Illegal Opcode or Uninitialized W Register Access
Configuration Mismatch Reset
MCLR Reset
RESET Instruction
WDT Time-out
PWRSAV #0 Instruction
PWRSAV #1 Instruction
POR, BOR
POR
PIC24FJ256GB210 FAMILY
Setting Event
(1)
(CONTINUED)
VREG
, when waking up from
CLRWDT, PWRSAV
Instruction, POR
Clearing Event
POR
POR
POR
POR
POR
POR
POR
DS39975A-page 87
—
—