PCA9691BS/1 NXP Semiconductors, PCA9691BS/1 Datasheet - Page 7

• Manufacturer Part Number: PCA9691BS/1
• Description: IC, ADC/DAC, 8-BIT, I2C, 16-HVQFN
• Manufacturer: NXP Semiconductors

Specifications of PCA9691BS/1

• Brief Features: 8bit Successive Approximation A/D Conversion, Low Standby Current
• Supply Voltage Range: 2.5V To 5.5V
• Operating Temperature Range: -40°C To +85°C
• Digital Ic Case Style: VQFN
• No. Of: RoHS Compliant
• Ic Function: 8-bit A/D & D/A Converter
• Rohs Compliant: Yes

NXP Semiconductors
PCA9691_2
Product data sheet
The selection of a non-existing input channel results in the highest available channel
number being allocated. Therefore, if the auto-increment flag is set, the next selected
channel is always channel 0.
After power-on all bits of the control register are reset to logic 0. The DAC and the
oscillator are disabled for power saving. The analog output is switched to a
high-impedance state.
The most significant bits of both nibbles are reserved for oscillator control. Bit 7 and bit 3
can be set when the interface frequency is f
two bits to logic 1 sets the internal frequency to half and the accuracy of the A/D and D/A
conversion is 1 LSB as indicated in
The oscillator output is disabled in normal operation (pin OSC is LOW). Setting bit 7 to
logic 0 and bit 3 to logic 1 will enable this output in order to observe the oscillator
frequency (divided by 4).
Rev. 02 — 27 January 2010
Table 8
SCL
and
≤ 400 kHz (see
Table
9.
8-bit A/D and D/A converter
Figure
PCA9691
6). Setting these
© NXP B.V. 2010. All rights reserved.
7 of 31