PIC18F64J90-I/PT Microchip Technology, PIC18F64J90-I/PT Datasheet - Page 135

• Manufacturer Part Number: PIC18F64J90-I/PT
• Description: Microcontroller
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F64J90-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, LVD, POR, PWM, WDT
• Number Of I /o: 51
• Program Memory Size: 16KB (8K x 16)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 64-TFQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC162079 - HEADER MPLAB ICD2 18F85J90 64/80AC164327 - MODULE SKT FOR 64TQFP
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

10.10 PORTJ, TRISJ and
PORTJ is an 8-bit wide, bidirectional port. The
corresponding Data Direction and Data Latch registers
are TRISJ and LATJ. All pins on PORTJ are digital only
and tolerate voltages up to 5.5V.
All pins on PORTJ are implemented with Schmitt
Trigger input buffers. Each pin is individually
configurable as an input or output.
All PORTJ pins, except RJ0, are multiplexed with LCD
segment drives controlled by the LCDSE4 register. I/O
port functions are only available on these pins when the
segments are disabled.
 2010 Microchip Technology Inc.
Note:
Note:
LATJ Registers
PORTJ is available only on 80-pin devices.
These pins are configured as digital inputs
on any device Reset.
PIC18F85J90 FAMILY
Each of the PORTJ pins has a weak internal pull-up.
The pull-ups are provided to keep the inputs at a known
state for the external memory interface while powering
up. A single control bit can turn off all the pull-ups. This
is performed by clearing bit RJPU (PORTG<5>). The
weak pull-up is automatically turned off when the port
pin is configured as an output. The pull-ups are
disabled on any device Reset.
EXAMPLE 10-9:
CLRF
CLRF
MOVLW
MOVWF
PORTJ
LATJ
0CFh
TRISJ
; Initialize PORTJ by
; clearing output latches
; Alternate method
; to clear output latches
; Value used to
; initialize data
; direction
; Set RJ3:RJ0 as inputs
; RJ5:RJ4 as output
; RJ7:RJ6 as inputs
INITIALIZING PORTJ
DS39770C-page 135