C500-AP003 Omron, C500-AP003 Datasheet - Page 27

• Manufacturer Part Number: C500-AP003
• Description: PROGRAMMING CONSOLE ADAPTER
• Manufacturer: Omron

Specifications of C500-AP003

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

CPU Power Supply
3G2A5-PS223-E
3G2A5-PS211-E
C500-PS213-E
14
•
•
Mounting screw
Do not loosen this screw.
Fuse holder
Contains a MF61NR fuse
(6.35-dia. x32)
PS211-E: 125 V, 4 A
PS213-E: 125 V, 6.3 A
POWER indicator
Lights when power is supplied.
Mounting screw
Do not loosen this screw.
Mounting screw
Do not loosen this screw.
Fuse holder
Contains a MF61NR fuse
(3 A, 250 V, 6.35-dia. x32)
POWER indicator
Lights when power is supplied.
Mounting screw
Do not loosen this screw.
Terminals for
external connections
Terminals for
external connections
This Power Supply is used in C1000H, C2000H Duplex and Simplex Systems.
This Power Supply is used in C1000H and C2000H Simplex Systems.
+
-
Voltage selector
Short: 100 to 120 V
Open: 200 to 240 V
AC input
LG
GR
START input
RUN output
24 VDC input
LG
GR
START input
RUN output
Connect a 100 to 120 VAC or 200
to 240 VAC power source.
Short these terminals to select 100
to 120 VAC. Open them to select
200 to 240 VAC.
Ground this terminal at a resis-
tance of less than 100 W to
improve noise immunity or prevent
electric shock.
Ground this terminal at a resis-
tance of less than 100 W to prevent
electric shock.
24 VDC output terminals are not
provided.
These terminals are short-circuited
as a factory-set condition. Remove
the short-circuit bracket to start or
stop the PC with an external signal.
Normally, leave them short-cir-
cuited.
These terminals are turned ON
during RUN operation.
Connect a 24 VDC power source
(2.3 A min.)
Ground this terminal at a resistance
of less than 100 W to improve noise
immunity or prevent electric shock.
Ground this terminal at a resistance
of less than 100 W to prevent elec-
tric shock.
24 VDC output terminals are not
provided.
These terminals are short-circuited
as a factory-set condition. Remove
the short-circuit bracket to start or
stop the PC with an external signal.
Normally, leave them short-cir-
cuited.
These terminals are turned ON dur-
ing RUN operation.
Section 2-2