C500CN122N Omron, C500CN122N Datasheet - Page 47

• Manufacturer Part Number: C500CN122N
• Description: I/O CONNECTION CABLE
• Manufacturer: Omron

Specifications of C500CN122N

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

System Configurations
How to Remove the
Memory Pack
3-5
C1000H System
C2000H Simplex System
34
System Configurations
1, 2, 3...
Follow the steps below to remove the Memory Pack from the CPU.
This section provides illustrations of assembled C1000H and C2000H Systems.
The following figure shows an assembled C1000H CPU Rack and one Expan-
sion I/O Rack. When 7 Expansion I/O Racks are connected to a CPU Rack, a
maximum of 1,024 I/O points are available. When Remote I/O Units are used in
the system, the maximum number of I/O points available increases to 2,048.
The C2000H Simplex System is similar to the C1000H except that the C2000H
Simplex CPU Rack has a maximum of six slots instead of eight. When seven
Expansion I/O Racks are connected to a CPU Rack, a maximum number of
I/O Control Unit
Connecting Cable
I/O Interface Unit
1. Turn the power to the PC OFF.
2. Using a standard screwdriver, remove the Memory Pack compartment
3. When removing the RAM Pack from the CPU, be sure to connect the RAM
4. Pull the white tabs of the Memory Pack up and out. The tabs push against
cover located on the front panel of the CPU. Push in the latch on the cover
and slide the cover upward.
Pack to a back-up battery before removing it from the Memory Compart-
ment, or the data will be lost.
Note Do not use the back-up battery located in the compartment above the
the guide rail provided for the Memory Pack and force the Memory Pack out
of the Memory Pack compartment.
Note When moving the C1000H or C2000H PCs, secure the Memory Pack
Memory Unit. This battery is used to back-up the internal memory of
the CPU. If this battery is disconnected, the contents of the internal
memory will be lost.
with holding brackets.
CPU
CPU Rack
CPU
Power Supply
Programming
Console
Expansion I/O
Power Supply
Section 3-5