NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 244

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

232
Graphs
(1) Click on a percentage value while pressing the Shift key and Ctrl key.
(2) Drag a percentage value to change the display position.
S Meter shape is displayed as follows according to the width rate.
Width Rate: 10%
S Scale position and its shape are displayed as follows depending on the set-
S When the Display Sign is set to ON, specified No. of division is applied also for
Example: In case No. of division is 5
Display Sign: ON
S In the default setting, a percentage value is displayed.
S If the setting for a percentage value is displayed, the size and display position
Length
tings of [Distance], [Scale Length].
Scale is always displayed at the front of meter. Therefore, when type is set to a
Needle, the needle may be invisible if meter and scale are overlapped.
a negative range. Therefore, actual numbers of division differs as follows de-
pending on the presence/absence of display sign even if the specified number
of divisions is same.
Whether or not a percentage value is displayed can be set in the [Display La-
bel] property.
Check mark set:
Check mark not set:
of the value can be modified using the element edit function in the manner
shown below. (For detail of the element edit function, refer to page 110.)
Scale
100%
10%
50%
Distance: 0% Distance: 100%
Width Rate: 50%
A percentage value is displayed.
A percentage value is not displayed.
Display Sign: OFF
Width Rate: 100%
Distance: 150%
Section
6-9