NT600SST211BEV3 Omron, NT600SST211BEV3 Datasheet - Page 449

• Manufacturer Part Number: NT600SST211BEV3
• Description: Controllers, Display
• Manufacturer: Omron

Specifications of NT600SST211BEV3

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Lead free / RoHS Compliant

11-5 Receiving (Uploading) the History Record
Operation procedure
Receiving (Uploading) the History Record
Reference: The history record data file (.LOG) can be output to a printer, saved in an RTF file,
It is possible to receive (upload) the display history record data and the alarm his-
tory record data, recorded in a PT, at the Support Tool to save them in a file.
The type of history record data that can be received is indicated in the table be-
low.
The received history record data is saved in a desired folder by assigning a file
name. The extension of the file name is fixed as .LOG.
Since the file is described in a special format, the contents cannot be read using
Windows general application tools.
or output to the screen, using the [Print] function or the [Print Preview] function of
the Support Tool.
To analyze the history record data using other software, convert the file into an
RTF file so that it can be read by other software.
(1) Select [Connect] (menu bar)
(2) Select the history record to be received.
(3) Set the folder and file name where the history record is to be saved and click
(4) Place the PT in the Transmit mode so that it can send the data to the Support
(5) While the data is sent from the PT, the progress of data transmission is indi-
NT11S/NT11, NT20S
NT30, NT30C, NT600S,
NT620S, NT620C, NT625C
NT21, NT31, NT31C, NT631,
NT631C
The menu is displayed, allowing you to select the history record to be re-
ceived.
The items that can be selected vary according to the PT model.
The dialog box for setting the file name for saving the history record is dis-
played.
on
Receiving of the history record data starts.
Tool.
If the PT is not in the Transmit mode, a timeout error occurs in about 10 se-
conds at the Support Tool. In this case, set the PT in the Transmit mode and
click on
cated by a bar graph.
To abort the operation, click on
PT Model
.
in the error message dialog box.
History Record Data
Screen Display
[Get History Log].

f
f
.
Alarm History
Record Data
Section


f
11-5
437