D4NL-1AFA-B Omron, D4NL-1AFA-B Datasheet - Page 16

• Manufacturer Part Number: D4NL-1AFA-B
• Description: SAFETY SWITCH
• Manufacturer: Omron

Specifications of D4NL-1AFA-B

• Contact Voltage Ac Max: 240V
• Contact Voltage Dc Max: 24V
• Contact Current Ac Max: 10A
• Contact Current Dc Max: 200mA
• Switch Terminals: Screw
• Svhc: No SVHC (15-Dec-2010)
• Approval Bodies: EN60747-5-1, IEC 947-5-1, EN1088,
• Contact Configuration: SPST-NC / SPST-NO
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Wiring
Wiring Precautions
• When connecting to the terminals via insulating tube and M3.5
• When connecting lead wires directly to terminals, perform wiring
• Do not push crimp terminals into gaps in the case interior. Doing so
• Use lead wires of an appropriate length. Not doing so may cause
• Use crimp terminals not more than 0.5 mm in thickness. Otherwise,
Conduit Opening
• Connect a recommended connector to the opening of the conduit
• In order to ensure IP67 degree of protection, wrap sealing tape
• Be sure that the outer diameter of the cable connected to the con-
• Attach and tighten a conduit cap to the unused conduit opening
16
J.S.T.
crimp terminals, cross the crimp terminals as shown above so that
they do not rise up onto the case or the cover. Applicable lead wire
size: AWG20 to AWG18 (0.5 to 0.75mm
securely so that there are no loose wire strands.
may cause damage or deformation of the case.
the cover to rise.
they will interfere with other components inside the case. The crimp
terminals shown below are not more than 0.5 mm thick.
and tighten the connector to the proper torque. The case may be
damaged if an excessive tightening torque is applied.
around the conduit end of the connector.
nector is correct.
when wiring. The conduit cap is provided with the Switch.
Manufacturer
dz dia.: 3.7 mm
D dia.: 2.9 mm
Guard Lock Safety-door Switch
B: 6.6 mm
L: 19 mm
F: 7.7 mm
I :
t: 0.5 mm
8.0 mm
Crimp terminal
D
Terminal screw
FV0.5-3.7
l
L
2
).
F
dz
Model
D4NL
B
Recommended Connectors
Use a connector with a screw section not exceeding 11 mm, other-
wise the screws will protrude into the case interior. The connectors
given in the following table have connectors with screw sections not
exceeding 11 mm.
Use the following connectors to ensure conformance to IP67.
Use LAPP connectors together with seal packing (JPK-16, GP-13.5,
or GPM20), and tighten with the applicable torque. Seal packing is
sold separately.
Maintenance and Repairs
The user must not perform repairs or maintenance. Contact the
machine manufacturer if repairs or maintenance are required.
Storage
Do not store the Switch in locations where harmful gases (e.g., H
SO
high humidity levels.
Miscellaneous
• Do not touch the solenoid. The temperature of the solenoid
• In conditions requiring greater rigidity, sealing performance, and oil
• Perform regular inspections.
G
Pg13.5
M20
increases when current is passed.
resistance, use OMRON’s D4BL.
1
Size
/
2
2
, NH
3
, HNO
LAPP
Ohm Denki
LAPP
LAPP
Manufacturer
3
, or Cl
2
) or dust are present, or in locations subject to
ST-PF1/2
5380-1002
OA-W1609
OA-W1611
S-13.5
5301-5030
ST-M20 *1.5
5311-1020
Model
6.0 to 12.0 mm
7.0 to 9.0 mm
9.0 to 11.0 mm
5.0 to 12.0 mm
7.0 to 13.0 mm
Applicable cable
diameter
2
S,