CS1W-CN713 Omron, CS1W-CN713 Datasheet - Page 73

• Manufacturer Part Number: CS1W-CN713
• Description: "CABLE CS1 EXP I/O,70cm"
• Manufacturer: Omron

Specifications of CS1W-CN713

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Input Unit Specifications
Note If IN0 through IN3 are set for use as input interrupts in the PC Setup, the ON
IR 00000 to IR 00015 are always allocated to the CPU Unit’s 16 built-in input
points.
and OFF delays for input interrupts are fixed at 0.1 ms max. and 0.5 ms max.,
respectively. If IN4 through IN6 are set for use as high-speed counter inter-
rupts, the delays for high-speed counters are as shown in the following table.
B0
A0
B1
A1
B2
A2
B3
A3
to
B7
A7
IN4 (A)
IN5 (B)
IN6 (Z)
Terminal
• Inputs IN0 to IN 3 (corresponding to IR 00000 to IR 00003) can be set in
• Inputs IN4 to IN7 (corresponding to IR 00004 to 00007) can be used as
Input
the PC Setup to be used as input interrupts.
high-speed counter 0.
5 kHz
Normal input
ON: 100 s min. required; OFF delay: 500 s min. required
IN0
IN1
IN2
IN3
IN4
IN5
IN6
IN7
to
IN14
IN15
number
Input
Incrementing mode
IR 00000
IR 00001
IR 00002
IR 00003
IR 00004
IR 00005
IR 00006
IR 00007
to
IR 00014
IR 00015
Input bit
Normal inputs or input interrupts (Input
Interrupt Mode or Counter Mode): set in
PC Setup (DM 6628).
Normal inputs or high-speed counter 0:
set in PC Setup (DM 6642).
Only usable as normal inputs.
2.5 kHz
Differential phase mode
Function
Section 2-2
51