N6761A AGILENT TECHNOLOGIES, N6761A Datasheet - Page 14

• Manufacturer Part Number: N6761A
• Description: POWER SUPPLY, BENCH, 50V, 50W
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of N6761A

• Power Supply Output Type: Variable
• No. Of Outputs: 1
• Output Voltage: 50V
• Output Current: 1.5A
• Power Rating: 50W
• Input Voltage: 100V AC To 240 V AC
• Length: 596.9mm
• Width: 432.5mm
• Height: 44.45mm
• Lead Free Status / RoHS Status: na

Size
The overall physical size of the
N6700A/B mainframe is much
smaller than the 662xA power
supply. Please see
right. Positive deltas indicate
smaller or lighter.
Color
The 662xA’s front panel color
was Mint Gray prior to 1988
and Parchment White from
1988 to the present. The case
color was French Gray prior
to 1988 and Dove Gray from
1988 to the present.
The N6700A/B front panel
color is Quartz Grey and
the case is unpainted,
zinc-plated steel.
Location and Cooling
The 662xA series power supplies
can operate without loss of
performance within the tem-
perature range of 0° to 55°C
(measured at the fan intake).
The fan, located at the rear of
the unit, cools the supply by
drawing air in through the
openings on the rear panel and
exhausting it through openings
on the sides. Please refer to
the gray arrows in
in
Mechanical/Physical
Appendix B
.
Table 8
Figure 1a
at
Height
Width
Depth
Weight
Table 8. Dimensions and Weight
The N6700 series power sup-
plies can operate without loss
of performance within the tem-
perature range of 0° to 55°C
(ambient). Three fans that
draw air in from the right side
of the unit and exhaust it out
the left side cool the front one-
third of the mainframe. Each
module also has a fan which
provide cooling for the rear
two-thirds of the mainframe
as well as the module itself by
drawing in air from the sides
and exhausting it out the rear.
Please refer to the gray arrows
in
Figure 1b
in
Appendix B
14
662xA
132.6 mm (5.22 in)
425.5 mm (16.75 in)
497.8 mm (19.6 in)
17.4–23 kg
(38–51 lbs)
.
N6700A/B
44.45 mm (1.75 in)
432.5 mm (17.03 in)
571.5 mm (22.5 in)
11–12.7 kg
(24.4–28 lbs)
Rack Mounting
NOTE: The N6700A/B mainframe
comes standard with handles
mounted on the front panel
and does not require a rack
mounting option if handles are
all that are required.
The N6700A/B has only one
rack mount option (Option
908). This option replaces
ALL 662xA rack mount options
as well as the rack mounting
accessories, such as the Rack
Slide Kit (p/n 1494-0059) and
support rails (E3663AC). A
Rack Slide Kit and support
Delta
88.15 mm (3.47 in)
-7.0 mm (-0.28 in)
-73.7 mm (-2.9 in)
6.4–10.3 kg
(13.6–23 lbs)