W352-E1-06 Omron, W352-E1-06 Datasheet - Page 169

• Manufacturer Part Number: W352-E1-06
• Description: Product Manual
• Manufacturer: Omron

Disconnecting
6-3-3 Uploading Programs
150
Handling
Note Do not attempt to remove the connector by pulling the cable.
Note Use a Phillips screwdriver or other tool with a diameter of 3.0 mm max. and a
Press the levers on the top and bottom of the connector inwards to unlock the
connector and pull out as shown in the following diagram.
Ladder programs and the contents of data memory can be uploaded to the
EEPROM using the following procedure. The buttons used will determine
whether the contents of data memory are uploaded or not.
blade length of 10 mm min. to press the upload button.
Uploading is possible even if the PC is in RUN or MONITOR mode.
Ladder program and
expansion instructions
DM6144 to 6655
UPLOAD+DM Button
Expansion Memory Unit
Indicator
Button
Read from PC to
EEPROM.
UPLOAD + DM
O
UPLOAD Button
10 mm min.
SYSMAC PC
Read from PC to
EEPROM.
Not affected.
3.0 dia. max.
Section
UPLOAD
6-3