NL10276BC30-18 NEC, NL10276BC30-18 Datasheet - Page 26

• Manufacturer Part Number: NL10276BC30-18
• Description: TFT DISPLAY, 15"
• Manufacturer: NEC

Specifications of NL10276BC30-18

• Lcd Display Type: XGA
• Display Mode: Active
• Interface Type: LVDS
• Viewing Area (h X W): 228.096mm X 304.128mm
• Supply Voltage: 3.3V
• Operating Temperature Range: -10°C To +70°C
• Pixel Size (h X W): 0.297mm X 0.297mm
• Backlight Type: CCFL
• Display Technology: LCD
• Luminance: 500cd/m2
• Rohs Compliant: Yes
• Pixel Pitch (h X W): 0.297mm X 0.297mm
• Svhc: No SVHC (20-Jun-2011)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6.3.2 Environment
⑥ The product must be installed using mounting holes without undue stress such as bends or twist
⑦ Do not press or rub on the sensitive product surface. When cleaning the product surface, use of the
⑧ Do not push nor pull the interface connectors while the product is working.
⑨ Do not bend or unbend the lamp cable at the near part of the lamp holding rubber, to avoid the
⑩ Properly connect the plug (backlight side) to adaptable socket (inverter side) without incomplete
⑪ If the lamp cable is attached on the metal part of the product directly, high frequency leak current to
⑫ When not connecting FG of the LCD module to the customer's equipment ground, inverter noise
⑬ When handling the product, use of an original protection sheet on the product surface (polarizer) is
⑭ Usually liquid crystals don't leak through the breakage of glasses because of the surface tension of
① Do not operate or store in high temperature, high humidity, dewdrop atmosphere or corrosive gases.
② In order to prevent dew condensation occurring by temperature difference, the product packing box
③ Do not operate in high magnetic field. Circuit boards may be broken down by it.
④ This product is not designed as radiation hardened.
connection. After connecting, be careful not to hook the lamp cables because incomplete
connection may occur by hooking the lamp cables. This incomplete connection may cause
abnormal operation of high voltage circuit.
(See outline drawings). And do not add undue stress to any portion (such as bezel flat area).
Bends or twist described above and undue stress to any portion may cause display mura.
Recommended installing method: Ideal plane "A" is defined by one mounting hole (datum point)
and other mounting holes. The ideal plane "A" should be the same plane within ±0.3 mm.
cloth with ethanolic liquid such as screen cleaner for LCD is recommended.
damage for high voltage side of the lamp.
the metal part may occur, then the brightness may decrease or the lamp may not be turned on.
may create video noise on the LCD screen.
recommended for protection of product surface. Adhesive type protection sheet may change color
or characteristics of the polarizer.
thin layer and the construction of LCD panel. But, if you contact with liquid crystal for the worst,
please wash it out with soap.
Keep the product in packing box with antistatic pouch in room temperature to avoid dusts and
sunlight, when storing the product.
should be opened after enough time being left under the environment of an unpacking room.
Evaluate the leaving time sufficiently because a situation of dew condensation occurring is changed
by the environmental temperature and humidity. (Recommended leaving time: 6 hours or more
with packing state)
Mounting hole "a" (Datum point)
Product
DATA SHEET DOD-PP-0320 (3rd edition)
Mounting hole "d"
Mounting hole "c"
Mounting hole "f"
Ideal plane "A"
NL10276BC30-18
26