NL2432HC22-40J NEC, NL2432HC22-40J Datasheet - Page 25

• Manufacturer Part Number: NL2432HC22-40J
• Description: TFT DISPLAY, LED, 3.5"
• Manufacturer: NEC

Specifications of NL2432HC22-40J

• Lcd Display Type: QVGA
• Display Mode: Transflective
• Interface Type: Serial
• Viewing Area (h X W): 53.64mm X 71.52mm
• Supply Voltage: 3V
• Operating Temperature Range: -20°C To +70°C
• Pixel Size (h X W): 0.223mm X
• Backlight Type: LED
• Display Technology: LCD
• Luminance: 220cd/m2
• Rohs Compliant: Yes
• Pixel Pitch (h X W): 0.2235mm X 0.2235mm
• Svhc: No SVHC (20-Jun-2011)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6. PRECAUTIONS
6.1 MEANING OF CAUTION SIGNS
6.2 CAUTIONS
6.3 ATTENTIONS
6.3.1 Handling of the product
① Take hold of both ends without touching the FPC when the product (LCD module) is picked up from
② Do not hook nor pull the FPC in order to avoid any damage.
③ When the product is put on the table temporarily, display surface must be placed downward.
④ When handling the product, take the measures of electrostatic discharge with such as earth band,
⑤ The product must be installed and/or handled without undue stress such as bends or twist. Bends,
⑥ Do not hit or rub the surface of panel with hard materials, because it is easily scratched.
⑦ When cleaning the panel surface, wipe it with a soft dry cloth.
⑧ Do not push nor pull the FPC while the product is working.
⑨ Do not fold the FPC. When the FPC is folded, pattern disconnection may be caused. In case of
⑩ When installing the product, do not contact a conductor such as a metal to the FPC excluding the
⑪ When installing the product, apply the waterproof design to avoid going of water into the product.
The following caution signs have very important meaning. Be sure to read "6.2 CAUTIONS" and
"6.3 ATTENTIONS", after understanding these contents!
(Polarizer pencil-hardness: 3H)
the tray.
ionic shower and so on, because the product may be damaged by electrostatic.
twist or undue stress to any portion may cause display failures. And also do not put heavy or hard
materials on the product.
bending FPC, the minimum curvature (R) must be more than 1.0 mm.
terminal area. There is a risk of short circuit which is caused by breakage of insulation layer of the
FPC.
∗ Do not touch the working backlight. There is a danger of an electric shock.
∗ Do not touch the working backlight. There is a danger of burn injury.
∗ Do not shock and press the LCD panel and the backlight! There is a danger of breaking,
!
because they are made of glass. (Shock: To be not greater 3,920m/s
2.5ms)
This sign has the meaning that customer will be injured by himself or the product will
sustain a damage, if customer has wrong operations.
This sign has the meaning that customer will get an electrical shock, if customer has
wrong operations.
This sign has the meaning that customer will be injured by himself, if customer has
wrong operations.
!
DATA SHEET DOD-PP-0129 (3rd edition)
2
and to be not greater
NL2432HC22-40J
25
☆
☆