5519 3M, 5519 Datasheet - Page 2

• Manufacturer Part Number: 5519
• Description: 5519 THERMAL PAD 77MMX105MM SHEET
• Manufacturer: 3M

Specifications of 5519

• Coating Applications: Electrical, Electronics
• Colour: Biege
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

*Tefl on is a trademark of DuPont Company
The wearer is ultimately responsible for his/her own safety;
• Verify the suitability of 3M
• No refl ective material can guarantee absolute visibility.
• Various factors (e.g., environmental) can infl uence visibility. For
• Field test the fi nished garment to verify its suitability for
4. Product Application
Retrorefl ective materials are important in applications where
being visible can reduce the risk of an accident. Examples of
hazardous situations where high-visibility garments should be
worn include exposure to vehicular traffi c of motorways, rural
and urban roads, railway environments, airports and docks.
3M
Wash Flame Resistant Fabric is a highly durable fl ame resistant
material recommended for garments that will be subjected to
domestic or industrial laundry procedures.
4.1 Occupational Application
Fire fi ghting apparel and fl ame resistant occupational work wear,
where enhanced fl ame and heat resistance as well as high wear
durability is required, such as fi re coats, turnout coats, trousers,
coveralls, jackets and uniforms.
5. Product Converting
5.1 Cutting
3M
Resistant Fabric can be handcut, die-cut or guillotined
(max. 5 cm stack height).
Note: Use very sharp cutting knives only and cut from the
refl ective side.
- 8940 Silver Industrial Wash Flame Resistant Fabric for the
intended use of the PPE (EC Directive 89/656/EEC Art. 4 and
Art. 5; EC Communication 89/C328/EEC Annex §7).
further details, see chapter 8 “Specifi c Safety Information”.
intended use and to select appropriate care conditions.
TM
TM
Scotchlite
Scotchlite
TM
TM
Refl ective Material - 8940 Silver Industrial
Refl ective Material - 8940 Silver Flame
TM
Scotchlite
TM
Refl ective Material
5.2 Sewing
3M
Wash Flame Resistant Fabric can be applied directly to a fabric.
It is best suited for fl ame resistant fabrics with a weight of 230 -
350 g/m².
The refl ective fabric should be sewn with a Tefl on
circular top needle, using a fl ame retardent thread (e.g. aramid).
To minimise edge fraying, sew in place using a lockstitch of 3
mm stitch length, placed at least 3 mm from the edge of the
refl ective fabric.
Note: Whenever two or more pieces of refl ective fabric are used
together on a single surface or as a set, they should be matched
to ensure uniform daytime colour appearance.
Colour variations may occur during the production of new
retrorefl ective material. These do not affect the performance
of the 3M
to the performance requirements described in EN 471 for
retrorefl ective material.
5.3 Silk Screen Printing
Due to the product construction, durable prints on glass bead
products are diffi cult to obtain.
Choice of ink will depend upon usage conditions and care
procedures. User should make test applications and select the
appropriate care instruction for the fi nished product to ensure
adequate adhesion of the ink. It is recommended that the ink
adhesion be tested on the actual batch of 3M
Refl ective Material - 8940 Silver Industrial Wash Flame Resistant
Fabric being used before production.
Opaque silk screen printing inks will appear black, transparent
inks will reduce brightness when viewed as retrorefl ected light in
low-light conditions.
Note: Refer to 3M Technical Information “Printing Guideline for
Glass Bead Products”. For further information contact your 3M
representative.
TM
Scotchlite
TM
Scotchlite
TM
Refl ective Material - 8940 Silver Industrial
TM
refl ective material, which will comply
TM
Scotchlite
®
coated brand
TM