5519 3M, 5519 Datasheet - Page 3

• Manufacturer Part Number: 5519
• Description: 5519 THERMAL PAD 77MMX105MM SHEET
• Manufacturer: 3M

Specifications of 5519

• Coating Applications: Electrical, Electronics
• Colour: Biege
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

6. Handling and Storage
6.1 Product Storage
Store in a cool, dry area and use within 2 year of receipt.
Rolls should be stored in their original cartons, while partially
used rolls should be returned to their carton or suspended
horizontally from the core via a rod or pipe.
Cut sheets should be stored fl at.
6.2 Handling and Storage Precautions
Agressive chemicals, e.g., sulphur or chlorine containing
compounds, perspiration, strong acids or bases may affect
the aesthetic appearance of 3M
Materials. When exposed to excessive heat and more than 70%
relative humidity conditions, these products have the potential
to become stained. These stains do not affect the retrorefl ective
performance of the material and do not indicate that the input
product was defective.
Care must be taken by the user when handling 3M
Silver Refl ective Materials in hot and humid environments. During
application, storage and shipping, ambient conditions should be
kept. Measures like cooling, dehumidifying the manufacturing
area and specifi c handling precautions should be taken.
Appropriate specifi c storekeeping is essential.
Knowing the individual situation, the user may contact 3M for
further advice if needed.
7. Product Maintenance
Refl ective fabrics and fi lms naturally age. Ageing depends
upon material type, conditions of use, environment and
maintenance procedures.
The retrorefl ective performance of all refl ective materials is
affected by soiling. Any kind of dirt, liquid chemicals, grease and
alike will reduce brightness in the area of contamination.
7.1 Product Cleaning
Frequent care and maintenance will ensure the continued
effectiveness of the refl ective material. The cleaning frequency
of the clothing depends on the degree of soiling expected in the
working environment.
TM
Scotchlite
TM
Silver Refl ective
TM
Scotchlite
TM
It is recommended that the garment be cleaned after every
intervention.
Before usage, the user shall determine the suitability of the
intended care process for 3M
- 8940 Silver Industrial Wash Flame Resistant Fabric. A test
application of the fi nished garment should be conducted to
determine the maximum number of care cycles expected for
each application.
For cleaning, see 3M
Silver Industrial Wash Flame Resistant Fabric Care Guideline.
For consultation on care, contact your local 3M representative.
For manual cleaning, damp wipe with a soft sponge or cloth
using a mild wash detergent.
For stain removal of fat or mineral oil etc., use a soft, clean cloth
dipped into white spirit. Wipe clean with water afterwards.
Caution:
The use of other stain removers such as aromatic solvents or
oxidising/corrosive substances is not recommended.
Washing/cleaning conditions harsher than those recommended
shorten the product’s lifetime signifi cantly.
7.2 Special Cleaning Instructions
• For application on rainwear, a regular fl uorocarbon treatment
• Chemical splashes should be removed with a soft, dry cloth.
• Splashes of strong acids or alkalis should immediately be
• Contamination with toxic or poisonous substances or
• Application of high alkaline products, solvenated detergents,
• Do not over dry. The temperature of the material should not
of the garment is recommended.
Cleaning the garment the same day is recommended.
neutralised with plenty of water.
bio-contamination will require the application of a specifi c
decontamination process.
bleaches, etc. are not recommended.
exceed 90°C at any time during drying.
TM
Scotchlite
TM
Scotchlite
TM
Refl ective Material - 8940
TM
Refl ective Material