5519 3M, 5519 Datasheet - Page 4

• Manufacturer Part Number: 5519
• Description: 5519 THERMAL PAD 77MMX105MM SHEET
• Manufacturer: 3M

Specifications of 5519

• Coating Applications: Electrical, Electronics
• Colour: Biege
• Svhc: No SVHC (15-Dec-2010)
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

7.3 Maintenance Misuse
3M
Wash Flame Resistant Fabric is an optical system. Coating of
the fabric with material of high refractive index, such as oil, will
greatly diminish refl ective performance.
• No harsh mechanical treatment, e.g. abrasion with wire
• No uniform coating or spraying of oils, protective waxes,
• No application of materials such as leather spray or shoe shine.
7.4 Inspection
High-visibility warning clothing should be maintained in good condition
and inspected regularly for signs of damage or deterioration.
Where frequent care cycles are performed, inspection should be
pursued after every cleaning cycle. Records of test results should
be kept for reference.
Replacement of the refl ective material must be considered, if the
retrorefl ective performance is below RA = 100 cd/lux/m²
(refer to EN 471).
For specifi c guidance contact your local 3M representative.
7.5 Product Disposal
Product can be recycled attached to the garment. The product
can be incinerated in a commercial or industrial facility or
disposed in a sanitary landfi ll. Before recycling, the compatibility
shall be determined with the intended recycling process.
3M Deutschland GmbH
Visibility & Insulation Solutions Laboratory
Carl-Schurz-Str. 1
D-41453 Neuss
Germany
I
All statements, technical information and recommendations herein are based on tests we believe to be reliable, but the accuracy or completeness thereof is not
guaranteed. We shall not be liable and no warranty shall apply for products not applied according to our published information folder.
Before using/converting, the user/converter must determine the suitability of the product for its intended use/converting, and the user/converter assumes all risk
and liability whatsoever in connection therewith. All questions of warranty and liability relating to this product are governed by the terms of the sale subject where
applicable to the prevailing law.
No statement or recommendation not contained herein shall have any force or effect unless in an agreement signed by offi cers of us.
mportant Notice to Purchaser / Converter / Wearer:
TM
brushes or sand paper.
inks or paint.
Scotchlite
TM
Refl ective Material - 8940 Silver Industrial
8. Specifi c Safety Information
8.1 Visibility Limits see chapter 3 “General Safety
Various environmental factors such as line of sight, rain, fog,
smoke, dust and visual noise can infl uence visibility.
Recognition of the wearer can also be signifi cantly reduced, if
the refl ective material is covered, e.g. by simultaneously wearing
personal protective equipment or obstacles in the working zone.
In such instances the wearer should be aware of these limitations.
The brightness of 3M
Silver Industrial Wash Flame Resistant Fabric can also be
diminished in extreme weather conditions.
• Test results show, that 3M
• Fog, mist, smoke and dust can scatter the light from headlights.
• Visual noise (contrast variations in the visual fi eld) decreases
- 8940 Silver Industrial Wash Flame Resistant Fabric exceeds
the retrorefl ective performance requirements in rainfall
conditions as defi ned in EN 471. Initial brightness levels
return as the material dries.
Where optical density levels are high, the wearer must be aware
that detection distances will be severely reduced.
the contrast of the refl ective material with the background
and affects the visibility in low-light conditions.
Information”
TM
3M and Scotchlite are trademarks of 3M.
Please recycle. Printed in U.K.
© 3M 2007. All rights reserved.
DS-8940-11-07
Scotchlite
TM
Scotchlite
TM
Refl ective Material - 8940
TM
Refl ective Material